We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled copper tubing, 5/8 inch outside diameter, 100 foot length

Mueller Industries, Inc.

Mueller Industries, Inc. KS04100 5/8 in OD 100 ft K Copper Coil Trap

SKU CH-NBG1-8EF38 MPN KS04100

Seamless Type K copper coil in 100 ft length for potable water systems rated to 713 psi at 200 Degrees F

  • TypeDrain Components
  • Seamless C12200 copper resists leaks and corrosion
  • ASTM B88, NSF 372 and NSF/ANSI/CAN 61 certify potable-water safety
  • 713 psi at 200 °F handles high-pressure hot lines
  • Soft temper allows tight bends without kinking
  • 100 ft coil cuts joints on long runs

Copper Coil for Potable Water Systems

This seamless Type K copper coil is manufactured to ASTM B88 standards for potable water distribution. The 100 ft length in a single coil reduces the number of joints required on long runs. It is suited for plumbers and contractors installing supply lines in residential or commercial projects. The soft temper allows bending by hand without special tools.

5/8 in Outside Diameter Type K Wall

The tube has a 5/8 in outside diameter and a 0.049 in wall thickness, meeting Type K specifications for the highest pressure rating in the copper tube series. This dimension determines compatibility with 1/2 in CTS fittings and the maximum operating pressure of 713 psi at 200 Degrees F. Select this size only when the design calls for Type K wall thickness.

100 ft Continuous Length for Extended Runs

The 100 ft coil handles long supply runs from meter to building or across crawl spaces without soldered couplings. It supports operating temperatures up to 400 Degrees F and carries NSF/ANSI/CAN 61 and NSF 372 certifications for drinking water safety. The coil format becomes cumbersome in tight mechanical rooms where straight lengths would be easier to maneuver.

Highlights

  • Seamless C12200 copper resists leaks and corrosion
  • ASTM B88, NSF 372 and NSF/ANSI/CAN 61 certify potable-water safety
  • 713 psi at 200 °F handles high-pressure hot lines
  • Soft temper allows tight bends without kinking
  • 100 ft coil cuts joints on long runs

Specifications

TypeDrain Components
BrandMueller Industries
ModelKS04100

Questions about this item

How does the 713 psi pressure rating hold up when the system runs at 200 °F?

The 713 psi maximum operating pressure is rated at 200 °F, so the tube maintains that strength at typical hot-water temperatures.

What do the ASTM B88 and NSF/ANSI/CAN 61 markings tell me about water-supply use?

ASTM B88 confirms the tubing meets standard dimensions and quality for seamless copper water tube, while NSF/ANSI/CAN 61 certifies it safe for potable water contact.

What clearance and bending radius do I need for a 5/8 in OD soft-temper coil?

At 5/8 in outside diameter with 0.049 in wall thickness, the soft temper allows hand bending to tight radii without kinking, fitting standard 1/2 in CTS fittings and supports.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.