We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled copper tubing roll, green finish, 60 ft length

Mueller Industries, Inc.

Mueller Industries, Inc. KS02060 Copper Trap 3/8 in OD 60 ft

SKU CH-WG16-H85AG MPN KS02060

Seamless copper coil, 60 ft length, 3/8 in OD, 860 psi rating, meets ASTM B88 and NSF standards

  • TypeDrain Components
  • ColorGreen
  • Seamless copper coil resists leaks and corrosion
  • 60 ft continuous length reduces joints in long runs
  • Soft temper allows easy hand bending without tools
  • Rated 860 psi at 200 °F for high-pressure systems
  • Meets ASTM B88, NSF 372 and NSF/ANSI/CAN 61 standards

Copper Type K coil for potable water

This 60 ft coil of seamless copper tubing is manufactured to ASTM B88 Type K specifications and meets NSF/ANSI/CAN 61 and NSF 372 for drinking-water systems. The soft temper allows easy bending by hand for residential and light-commercial plumbing installations.

60 ft length with 860 psi pressure rating

The 3/8 in outside diameter and 0.305 in inside diameter provide ample flow capacity for standard fixture supply runs and short distribution branches. Maximum operating pressure of 860 psi at 200 °F gives generous headroom for municipal supply pressures and thermal expansion in hot-water lines.

Soft temper copper handles 400 °F continuous

Seamless C12200 copper construction resists scaling and corrosion without requiring protective coatings. The 0.035 in wall thickness withstands repeated thermal cycles up to 400 °F while remaining pliable enough for flare or compression fittings without work-hardening cracks.

Highlights

  • Seamless copper coil resists leaks and corrosion
  • 60 ft continuous length reduces joints in long runs
  • Soft temper allows easy hand bending without tools
  • Rated 860 psi at 200 °F for high-pressure systems
  • Meets ASTM B88, NSF 372 and NSF/ANSI/CAN 61 standards

Specifications

TypeDrain Components
ColorGreen
BrandMueller Industries
ModelKS02060

Questions about this item

Will the 3/8 in outside diameter and 0.035 in wall thickness match my existing 1/4 in copper tube size fittings?

Yes, this coil is Copper Tube Size 1/4 in with a 3/8 in outside diameter and 0.035 in wall thickness, so it fits standard CTS 1/4 in fittings.

How can I verify the seamless copper coil meets the ASTM B88 and NSF/ANSI/CAN 61 standards after installation?

Check for the ASTM B88 and NSF 61 markings printed on the tubing; the seamless C12200 copper construction and 860 psi rating at 200 Degrees F confirm compliance.

Does the 60 ft coil include any caps or cleaning for potable water use, or must I buy those separately?

The tubing is not cleaned and capped, so you will need to purchase end caps and perform any required cleaning before potable water installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.