We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight copper tube, 7/8 inch outside diameter, two feet long, hard temper

Mueller Industries, Inc.

Mueller Industries, Inc. KH06002 Copper Trap 7/8 in OD 2 ft Type K

SKU CH-XS0W-95Z80 MPN KH06002

Straight copper tubing for potable-water lines, seamless C12200 alloy rated to 682 psi at 200 °F, 7/8 in OD by 2 ft length, Type K wall

  • TypeDrain Components
  • Seamless copper construction resists leaks
  • Type K wall thickness handles 682 psi at 200 Degrees F
  • ASTM B88 and NSF/ANSI/CAN 61 certified for potable water
  • Hard-drawn temper maintains shape during installation
  • 2 ft straight length ready for cutting to fit

Copper Type K Tubing 2 ft

This seamless copper tube meets ASTM B88 and NSF/ANSI/CAN 61 standards for potable water. The hard-drawn C12200 alloy handles 682 psi at 200 Degrees F and up to 400 Degrees F operating temperature. It arrives straight in a two-foot length with a 7/8 in outside diameter.

Plumbers and installers needing code-compliant

The Type K wall thickness of 0.065 in suits buried or exposed runs where extra strength is required. Projects that demand cleaned, capped, or pre-bent tubing, or a different copper tube size, should look at other stock.

3/4 in CTS with 0.75 in bore

The bore comfortably feeds standard residential fixtures and short distribution branches. Extended runs with high fixture counts will exceed the practical flow capacity of this diameter.

Highlights

  • Seamless copper construction resists leaks
  • Type K wall thickness handles 682 psi at 200 Degrees F
  • ASTM B88 and NSF/ANSI/CAN 61 certified for potable water
  • Hard-drawn temper maintains shape during installation
  • 2 ft straight length ready for cutting to fit

Specifications

TypeDrain Components
BrandMueller Industries
ModelKH06002

Questions about this item

What pipe size and fitting type will accept the 7/8 in outside diameter of this Type K copper tubing?

The tubing has a 7/8 in outside diameter that matches 3/4 in copper tube size; use 3/4 in copper fittings designed for solder or press connections.

Can the 682 psi rating at 200 Degrees F handle a system that also runs older 1/2 in Type M copper lines?

Yes, the Type K wall thickness of .065 in and 682 psi rating exceed typical residential pressures, so it can connect to existing 1/2 in Type M lines with appropriate reducing fittings.

How can I confirm the tubing meets potable-water standards after installation?

The tube carries ASTM B88, NSF 372 and NSF/ANSI/CAN 61 markings; verify the ink stamps are visible on the straight length after cutting and fitting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.