We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled copper tubing roll 3/8 inch diameter 100 feet long

Mueller Industries, Inc.

Mueller Industries, Inc. D 06100P Copper Coil Tubing 3/8 in 100 ft Type ACR

SKU CH-WASP-HBDBK

Seamless copper coil tubing, 3/8 in outside diameter by 100 ft, rated to 787 psi at 200 °F for air-conditioning and refrigeration lines

  • TypeDrain Components
  • MaterialCopper
  • Seamless copper resists leaks in refrigeration lines
  • 100 ft coil covers long runs without joints
  • Soft temper bends easily around tight corners
  • ASTM B280 grade meets AC/R pressure standards
  • Rated 787 psi at 200 °F for reliable service

Copper Coil Tubing for Air Conditioning

This 100 ft copper coil tubing is designed for air conditioning and refrigeration installations. It meets ASTM B280 standards and uses UNS C12200 grade copper. The soft temper allows easy bending and shaping during fitting. Suitable for professional plumbers and HVAC technicians.

Thermal Performance and Pressure Rating

The tubing handles a maximum operating temperature of 400 Degrees F and a maximum operating pressure of 787 psi at 200 Degrees F. Seamless fabrication ensures consistent wall thickness of .032 in for reliable heat transfer. No coating or cleaning is applied, leaving the copper surface ready for brazing.

Sustained Load Behaviour

Under continuous high-temperature and high-pressure conditions the copper material maintains structural integrity up to the rated limits. The .25 in inside diameter supports steady refrigerant flow without deformation. Installers should verify system design pressures do not exceed 787 psi at elevated temperatures.

Highlights

  • Seamless copper resists leaks in refrigeration lines
  • 100 ft coil covers long runs without joints
  • Soft temper bends easily around tight corners
  • ASTM B280 grade meets AC/R pressure standards
  • Rated 787 psi at 200 °F for reliable service

Specifications

TypeDrain Components
MaterialCopper
BrandMueller Industries
ModelD 06100P

Questions about this item

How do I flare the 3/8 in soft copper tubing and what step is often missed?

Cut the coil squarely, deburr the .25 in inside diameter, slide the flare nut on before flaring, then use a 3/8 in flaring tool; the missed step is forgetting the nut until after the flare is made.

What maintenance or replacement will this 100 ft copper coil need over time?

Inspect joints for green corrosion and verify the .032 in wall has not thinned from vibration or acidic condensate; replace any section that shows pitting or has exceeded the 787 psi @ 200 Degrees F rating.

What limit appears first when this Type ACR tubing runs continuously at high temperature?

The 400 Degrees F maximum operating temperature is reached before the 787 psi pressure ceiling, so sustained heat is the limiting factor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.