We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small galvanized iron elbow fitting with 45 degree bend and threaded ends

Mueller Industries, Inc.

Mueller Industries, Inc. 3440 1/8 In. 45 Deg. Galvanized Elbow

SKU CH-E6KN-BPBAY

A galvanized malleable-iron 45-degree elbow with 1/8-inch threads, individually flag-tagged and 100% quality tested to ANSI/ASME standards

  • Type3440
  • Size1/8 In.
  • Galvanized finish resists corrosion for long outdoor life
  • 45-degree angle redirects flow in tight piping layouts
  • Malleable iron construction withstands high pressure and impact
  • 100% inspected and quality tested to ANSI standards
  • Individually flag tagged for easy identification and traceability

Galvanized Malleable Iron 45° Elbow

This 1/8 In. galvanized malleable iron elbow provides a 45-degree directional change in piping systems. Each fitting carries the Mueller logo cast into the body and is individually flag tagged. The component meets ANSI/ASTM A-197 material standards and ANSI/ASME B16.3, B16.14 and B16.39 dimensional specifications. Threads conform to ANSI B1.20.1 and every piece is 100% inspected and quality tested.

Suited for low-pressure pipe connections requiring

Installers needing a galvanized malleable iron elbow for water, gas or air lines in residential or light commercial work will find this fitting matches the required standards. It is not intended for high-pressure hydraulic systems, stainless steel piping networks, or applications demanding welded rather than threaded joints. Buyers who need a different angle, a larger diameter or a non-galvanised finish should select an alternative fitting.

Thread standard ANSI B1.20.1 governs compatibility

The single specification that decides whether this is the right part is the thread standard ANSI B1.20.1, which defines the taper pipe thread form used on this 1/8 In. fitting. Only components cut to the same ANSI B1.20.1 specification will seal correctly when assembled with this elbow. Verify that the mating pipe or fitting references this exact thread standard before purchase.

Highlights

  • Galvanized finish resists corrosion for long outdoor life
  • 45-degree angle redirects flow in tight piping layouts
  • Malleable iron construction withstands high pressure and impact
  • 100% inspected and quality tested to ANSI standards
  • Individually flag tagged for easy identification and traceability

Specifications

BrandB K Mueller
Type3440
Size1/8 In.

Questions about this item

What pipe size and thread standard does the 3440 galvanized elbow require for a proper fit?

The 3440 elbow is sized at 1/8 In. and uses threads conforming to ANSI B 1.20.1, so the connecting pipe must match that nominal size and thread standard.

Will the galvanized finish on this 45 Deg. elbow react with older black iron pipe already in the system?

The fitting is hot-dip galvanized malleable iron per ANSI/ASTM A-197; it can be joined to black iron pipe using standard thread sealant, but dissimilar-metal corrosion is minimal in dry or non-conductive fluid service.

How can I verify the 3440 elbow meets the required pressure-class dimensions after installation?

Each fitting carries a cast Mueller logo and an individual flag tag confirming 100% inspection to ANSI/ASME B16.3, B16.14 and B16.39 dimensional standards.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.