We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC sanitary street tee, spigot by hub by hub, 2.75 inches long

Mueller Industries, Inc.

Mueller Industries, Inc. 06113 PVC Sanitary Street Tee Trap 2 in Schedule 40 Spigot x Hub x Hub White

SKU CH-2RXK-A5FKC MPN 06113

PVC sanitary street tee connects 2-inch drain lines at 140 °F max with Schedule 40 spigot and dual hub ends

  • TypeDrain Components
  • Schedule 40 PVC resists corrosion and handles 140 °F water
  • Spigot-by-hub-by-hub design simplifies DWV branch connections
  • Meets ASTM D2665, D3311, D3965 and F1498 standards
  • NSF International listing confirms safe potable-water use
  • Compact 2.75 in length fits tight drain assemblies

PVC Sanitary Street Tee 2 in

This Mueller Industries PVC sanitary street tee connects a 2 in spigot to two hub ends for drain, waste and vent installations. It is intended for plumbers and contractors assembling non-pressure drainage systems in residential or light commercial projects.

Schedule 40 PVC rated to 140 Degrees F

The Schedule 40 fitting carries ASTM D2665, D3311, D3965 and F1498 listings plus NSF International compliance. It is not rated for pressure applications and the maximum service temperature is 140 Degrees F, so sustained hot-water flow above that level must be avoided.

Check pipe size and connection type before ordering

Verify that your existing system uses 2 in Schedule 40 PVC and requires a spigot-by-hub-by-hub configuration. The overall fitting length is 2.75 in, so confirm the available space in the assembly. This tee is not suitable for pressurised lines or high-temperature service.

Highlights

  • Schedule 40 PVC resists corrosion and handles 140 °F water
  • Spigot-by-hub-by-hub design simplifies DWV branch connections
  • Meets ASTM D2665, D3311, D3965 and F1498 standards
  • NSF International listing confirms safe potable-water use
  • Compact 2.75 in length fits tight drain assemblies

Specifications

TypeDrain Components
BrandMueller Industries
Model06113

Questions about this item

Does the PVC tee generate any noise or heat when water runs through it all day?

The fitting is a passive Schedule 40 PVC component with no moving parts, so it produces no noise or heat during continuous drainage flow.

What existing pipe and solvent cement must I already have to install this 2-inch spigot-by-hub tee?

You need 2-inch Schedule 40 PVC pipe and a solvent cement that meets the ASTM standards referenced for the fitting, plus primer if your local code requires it.

Will this Schedule 40 street tee connect directly to older ABS or metal drain lines I plan to keep?

The hub ends accept 2-inch Schedule 40 PVC only; joining to ABS or metal requires listed transition couplings approved for those materials.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.