We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC sanitary tee with hub connections, 4x4x4x2 inches

Mueller Industries, Inc.

Mueller Industries, Inc. 05784 Sanitary Tee trap

SKU CH-3MJC-XJBFG MPN 05784

A PVC sanitary tee with left-side inlet, Schedule 40 construction meeting ASTM D2665 and D3311 standards for drainage systems

  • TypeDrain Components
  • ColorWhite
  • Schedule 40 PVC meets ASTM D1784 Cell Class 12454
  • Hub connection enables solvent-weld installation
  • Sanitary tee with left side inlet for drainage branching
  • White PVC resists corrosion in DWV systems
  • Conforms to ASTM D2665 and D3311 standards

PVC Sanitary Tee with Left Inlet

This PVC sanitary tee provides a hub connection with a left-side inlet for drainage installations. The fitting is manufactured to Schedule 40 dimensions and meets ASTM D2665 for performance and D3311 for laying lengths. It suits plumbers and contractors assembling DWV systems in residential or commercial projects.

Simple solvent-weld installation

The hub ends accept standard PVC pipe for solvent cement joining without special tools. Ensure pipe ends are cut square, deburred and cleaned with primer before applying cement. Misaligned joints or insufficient cure time are the most common causes of leaks in this type of fitting.

Verify pipe schedule and local code

Confirm the existing system uses Schedule 40 PVC sized for hub connections before ordering. The fitting meets cell class 12454 per ASTM D1784, but local plumbing codes may impose additional requirements. This tee does not suit press-fit, threaded or dissimilar-material piping.

Highlights

  • Schedule 40 PVC meets ASTM D1784 Cell Class 12454
  • Hub connection enables solvent-weld installation
  • Sanitary tee with left side inlet for drainage branching
  • White PVC resists corrosion in DWV systems
  • Conforms to ASTM D2665 and D3311 standards

Specifications

TypeDrain Components
ColorWhite
BrandMueller Industries
Model05784

Questions about this item

How can I confirm the Mueller Industries 05784 Sanitary Tee is installed correctly and meets code?

Verify the hub connections are fully seated and solvent-welded per Schedule 40 practice, then pressure-test the DWV system; the fitting meets ASTM D2665 for dimensions and performance and ASTM D3311 for laying lengths.

What comes with the 05784 Sanitary Tee and what additional parts are required for installation?

The package contains one white PVC sanitary tee with left side inlet and hub ends; you must supply Schedule 40 PVC pipe, primer, solvent cement and any strapping or hangers required by local code.

Which Mueller Industries sanitary tee version should I choose for a four-inch DWV stack with a two-inch vent take-off?

Select model 05784, a 4 in x 4 in x 4 in x 2 in PVC Schedule 40 sanitary tee with left side inlet that meets ASTM D1784 cell class 12454.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.