We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black ABS long sweep elbow trap with low heel inlet, 90 degree hub connection

Mueller Industries, Inc.

Mueller Industries 03025 Long Sweep Elbow Trap 90 Degree Hub

SKU CH-ZKVJ-QCJ7W MPN 03025

A 90-degree long sweep elbow trap with hub connection for 3 x 1-1/2 inch drainage pipe in ABS material

  • TypeDrain Components
  • ColorBlack
  • Long sweep design reduces flow resistance for efficient drainage
  • 90-degree low heel inlet enables smooth directional changes in tight spaces
  • ABS construction withstands temperatures from -40 to 180 degrees Fahrenheit
  • Meets ASTM D2665 for dimensions and ASTM D3311 for laying length
  • Cell class 32222 per ASTM D3965 confirms material quality

3-inch long sweep elbow

This Mueller Industries 03025 fitting directs waste flow through a 90-degree turn with a low heel inlet. The hub connection joins 3-inch and 1-1/2-inch pipes in drainage systems. ABS construction handles temperatures from -40 to 180 degrees F. It meets ASTM D2665 and D3311 for dimensions and laying length.

Standards and material

The ABS body is produced to cell class 32222 per ASTM D3965, ensuring consistent material quality. Compliance with ASTM D2665 confirms dimensional accuracy and performance for drain, waste and vent use. ASTM D3311 governs the pattern and laying length so the elbow fits standard plumbing layouts.

Hub sizing and code acceptance

Verify that your existing pipe uses a 3-inch by 1-1/2-inch hub configuration before ordering. Confirm local plumbing codes accept ABS fittings for the intended application. The fitting is not restricted for sale in any listed state.

Highlights

  • Long sweep design reduces flow resistance for efficient drainage
  • 90-degree low heel inlet enables smooth directional changes in tight spaces
  • ABS construction withstands temperatures from -40 to 180 degrees Fahrenheit
  • Meets ASTM D2665 for dimensions and ASTM D3311 for laying length
  • Cell class 32222 per ASTM D3965 confirms material quality

Specifications

TypeDrain Components
ColorBlack
BrandMueller Industries
Model03025

Questions about this item

Will the ABS material in the 03025 elbow degrade or need replacement under normal drain temperatures?

The ABS construction is rated for continuous service from -40 to 180 degrees F and meets ASTM D3965 cell class 32222, so it will not degrade within that range.

What is the first limit reached if hot water near 180 degrees F runs continuously through the 03025?

The material temperature ceiling of 180 degrees F is the first limit; sustained flow above that exceeds the ABS rating.

Does the 03025 long-sweep elbow transmit vibration or water-hammer noise when the system runs all day?

ABS dampens sound better than metal, and the long-sweep geometry reduces turbulence, so noise and vibration remain low during continuous use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.