We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12-inch car subwoofer with dual voice coil and rubber surround

MTX

MTX TN1202 12" 400W 2 Ohm Car Subwoofer

SKU CH-73DS-3PYZJ

A 12 inch car subwoofer with dual 2 ohm voice coils handling 200W RMS and reaching 24 Hz

  • TypeSubwoofers
  • Subwoofer Size12"
  • Cone MaterialWoofer
  • Voice CoilDual
  • Peak Power400W
  • RMS Power200W
  • Deep bass down to 24 Hz extends low-end impact
  • 200 W RMS power handles sustained output cleanly
  • Dual 2 Ω voice coil offers flexible amplifier wiring
  • Polypropylene cone with rubber surround resists wear over time
  • Compact 5.44" mounting depth fits tight enclosure spaces

MTX Terminator 12-inch subwoofer

The MTX Terminator TN1202 is a 12-inch car subwoofer built for drivers who want deep bass without a complex multi-driver setup. It handles 200 watts RMS and 400 watts peak power, making it suitable for daily listening at moderate volumes. The dual 2-ohm voice coil gives wiring flexibility for mono or stereo amplifiers. Buyers who need higher output for competition-level SPL should consider larger or multi-subwoofer systems.

Dual voice coil and ALDS motor

The 1.5-inch dual voice coil works with the Asymmetrical Linear Drive System, using a flat progressive spider and extended pole piece for piston-like motion. Spider Plateau Venting directs air at the coil to manage heat during extended play. A polypropylene cone with rubber surround resists fatigue and environmental wear. The 5.44-inch mounting depth and 11.08-inch cut-out fit many standard enclosures, though shallow-mount installations are not possible.

Upgrade from factory or entry woofers

This subwoofer replaces thin-sounding factory bass or basic single-coil units with 24 Hz to 160 Hz response and 86.4 dB sensitivity. It performs best with 100 to 200 watts RMS amplification in a 1.25 cubic foot sealed or 2.00 cubic foot vented box. The 27-ounce magnet and 30.92 cubic inch displacement move enough air for noticeable low-end authority. Systems already running high-power monoblocks above 200 watts RMS will not gain further headroom here.

Highlights

  • Deep bass down to 24 Hz extends low-end impact
  • 200 W RMS power handles sustained output cleanly
  • Dual 2 Ω voice coil offers flexible amplifier wiring
  • Polypropylene cone with rubber surround resists wear over time
  • Compact 5.44" mounting depth fits tight enclosure spaces

Specifications

BrandMTX
SeriesTerminator Series
TypeSubwoofers
Subwoofer Size12"
Cone MaterialWoofer
Voice CoilDual
Peak Power400W
RMS Power200W
Frequency Response24 Hz - 160 Hz
Sensitivity86.4 dB
Impedance2 Ohm
Displacement30.92 cu. in.
Sealed Box Volume1.25 cu ft
Ported Box Volume2.00 cu ft
Mounting Depth5.44" (13.82 cm)
Cut-Out Dimensions11.08" (28.14 cm)
Number of WooferSingle
Feature400W Peak

Questions about this item

What impedance does the dual voice coil present and how much RMS power can it handle?

The dual voice coil is rated at 2 Ohm and the subwoofer handles 200W RMS.

What are the cut-out diameter and mounting depth needed to install this 12-inch driver?

The cut-out diameter is 11.08" (28.14 cm) and the mounting depth is 5.44" (13.82 cm).

How do you wire the dual 2 Ohm voice coils and which enclosure volume matches a sealed build?

Wire the coils in series for a 4 Ohm load or parallel for 1 Ohm; a sealed enclosure requires 1.25 cu ft net volume.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.