We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black 6x9 three-way car speakers with concave cones and pivoting tweeters

MTX

MTX THUNDER693 6x9 3-way car speaker pair 100W RMS

SKU CH-EF0C-Z8D2J MPN THUNDER693

A 6x9 three-way pair handling 100 W RMS, reaching 42 Hz with 92 dB sensitivity and a pivoting tweeter for wider imaging

  • Type3-way Speaker
  • Speaker Size6" x 9"
  • Vehicle TypeAutomotive
  • ColorBlack
  • Peak Power200 Watts
  • RMS Power100 Watts
  • Full bass without a subwoofer down to 42Hz
  • Clear highs from dual tweeters with 15° pivot
  • Wide 92dB sensitivity plays loud on low power
  • Concave cone spreads sound evenly off-axis
  • 100W RMS handles demanding music cleanly

Three-way coaxial speaker pair

The MTX THUNDER693 is a 6" x 9" three-way coaxial speaker pair rated for 100W RMS and 200W peak power. It uses a polypropylene woofer with a concave cone design and dual pivoting tweeters that swivel 15° in two directions for improved imaging. The speakers present a 4-ohm impedance and 92dB sensitivity.

Listeners who want deep bass without a subwoofer

The frequency response reaches down to 42Hz, so these speakers suit listeners who want extended low-frequency reproduction without adding a separate subwoofer. Buyers who need higher power handling or a different impedance for their amplifier should look at other models.

42Hz low-frequency extension

The 42Hz lower limit is the specification that determines whether this pair can replace a subwoofer in a system. If your installation requires bass output below this point, the THUNDER693 will not meet that need on its own.

Highlights

  • Full bass without a subwoofer down to 42Hz
  • Clear highs from dual tweeters with 15° pivot
  • Wide 92dB sensitivity plays loud on low power
  • Concave cone spreads sound evenly off-axis
  • 100W RMS handles demanding music cleanly

Specifications

BrandMTX
Type3-way Speaker
Speaker Size6" x 9"
ModelTHUNDER693
Vehicle TypeAutomotive
ColorBlack
Peak Power200 Watts
RMS Power100 Watts
Sensitivity92dB
Frequency Response42Hz - 20kHz
Impedance4 Ohm
FeaturesExtended low frequency reproduction for bigger, fuller sound.
Concave cone design for improved off-axis response.
Pivoting tweeter for improved imaging in any installation location. 15° swivel in two directions
Cone Material: Polypropylene
Grille Included: Yes
Woofer Mounting Depth: 3.0"
Shipping weight4.51 kg
Package size432 × 305 × 140 mm

Questions about this item

Does the MTX THUNDER693 pair include mounting hardware or must I buy brackets and wiring separately?

The pair ships as two complete 6" x 9" three-way coaxial speakers with integrated grilles and pivoting tweeters; mounting screws, speaker wire and any vehicle-specific adapter brackets are not included.

The THUNDER693 is the only model listed — how do I know it matches my head unit and space?

The speaker handles 100 W RMS at 4 Ω with 92 dB sensitivity and fits standard 6" x 9" openings, so it works with any head unit or amplifier rated for 4 Ω loads and the factory cut-out in most vehicles.

What does the 100 W RMS rating mean once the THUNDER693 is installed in my doors?

100 W RMS is the continuous power the woofer can dissipate thermally; with 92 dB sensitivity the speaker reaches high output on modest amplifier power, and the 42 Hz low-frequency extension delivers audible bass even without a subwoofer.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.