We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10-inch car subwoofer with inverted apex surround and vented spider plateau

MTX

MTX 3510-02 10" 2 Ohm Car Subwoofer 250W RMS

SKU CH-GWG5-A708C

A 10-inch, 2-ohm car subwoofer rated at 250 watts RMS with a 28 Hz to 130 Hz frequency response for deep, accurate bass

  • Delivers strong bass output with 250 W RMS power handling
  • Handles dynamic peaks cleanly thanks to 500 W peak capacity
  • Reproduces deep lows down to 28 Hz for full-range impact
  • Inverted apex surround increases cone area for higher SPL
  • Spider plateau venting directs cool air to the voice coil for thermal stability

MTX 3510-02 10" Subwoofer

This MTX 3510-02 is a 10 inch car subwoofer rated at 250W RMS and 500W peak power. It uses a single voice coil with a 2 ohm impedance and delivers a frequency response from 28Hz to 130Hz. The inverted apex surround increases surface area for higher volume displacement and SPL. Spider plateau venting directs cool air at the voice coil for thermal management.

Ideal for single-sub builds needing 2 ohm load

This subwoofer suits installations where a 2 ohm load matches the amplifier design. It fits a 9-3/16 inch cutout with 4-5/8 inch mounting depth. Builders who need a 4 ohm impedance or dual voice coil wiring options should look at a different model. The 83.2 dB 1W/1m sensitivity means it needs adequate amplifier power for high output.

Fits standard 10 inch enclosures

The 10 3/8 inch overall diameter fits common 10 inch sealed or ported boxes. The progressive suspension controls excursion at high power to reduce distortion. Pair it with an amplifier stable at 2 ohms delivering around 250W RMS for best performance. The venting system helps maintain consistent output during extended listening sessions.

Highlights

  • Delivers strong bass output with 250 W RMS power handling
  • Handles dynamic peaks cleanly thanks to 500 W peak capacity
  • Reproduces deep lows down to 28 Hz for full-range impact
  • Inverted apex surround increases cone area for higher SPL
  • Spider plateau venting directs cool air to the voice coil for thermal stability

Specifications

BrandMTX
Model3510-02

Questions about this item

What amplifier power rating matches the 250W RMS spec of this 10" subwoofer?

Choose an amplifier rated around 250 watts RMS at 2 ohms to match the subwoofer's continuous power handling.

Can the 2-ohm impedance of this 3510-02 model be wired with a second identical sub to a mono amplifier?

Yes, wiring two 2-ohm subs in series presents a 4-ohm load, while parallel wiring gives a 1-ohm load; verify your amplifier is stable at the resulting impedance.

How can I confirm the 28Hz low-frequency response is being reproduced after installation?

Play a 28 Hz test tone at moderate volume; the cone should move visibly and you should feel tactile bass output without audible distortion.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.