MSI
MSI X670E GAMING PLUS WIFI Motherboard 2 in 1 accessory
Adds Wi-Fi 6E, Bluetooth 5.3 and 2.5 Gbps LAN to an X670E motherboard for Ryzen 7000, 8000 and 9000 CPUs with DDR5 up to 7800 MHz
- Supports AMD Ryzen 7000, 8000 and 9000 series processors
- DDR5 memory overclocked to 7800 MHz for faster throughput
- 14+2+1 Duet Rail power system with dual 8-pin CPU connectors
- PCIe 5.0 slot and Lightning Gen5 M.2 for high-speed storage
- Wi-Fi 6E and Bluetooth 5.3 plus 2.5 Gbps LAN for connectivity
MSI X670E GAMING PLUS WIFI Accessory
This accessory is designed for the MSI X670E GAMING PLUS WIFI motherboard. It supports AMD Ryzen 9000, 8000 and 7000 series processors on the AM5 platform. The kit complements a board built for DDR5 memory and PCIe 5.0 connectivity.
Suits builders adding high-speed storage
It suits builders who want to use the Lightning Gen5 M.2 slot with the included M.2 Shield Frozr heatsink. It does not suit buyers whose motherboard lacks a compatible Gen5 M.2 slot or the mounting points for this shield.
M.2 Shield Frozr heatsink included
The single specification that decides fit is the presence of the M.2 Shield Frozr thermal accessory. This heatsink is made for the board's PCIe 5.0 M.2 slot to maintain performance during heavy workloads.
Highlights
- Supports AMD Ryzen 7000, 8000 and 9000 series processors
- DDR5 memory overclocked to 7800 MHz for faster throughput
- 14+2+1 Duet Rail power system with dual 8-pin CPU connectors
- PCIe 5.0 slot and Lightning Gen5 M.2 for high-speed storage
- Wi-Fi 6E and Bluetooth 5.3 plus 2.5 Gbps LAN for connectivity
Specifications
No published specifications for this item yet.
Questions about this item
What PCIe standard does the board's primary slot use and what bandwidth does it cap at?
The primary slot runs at PCIe 5.0, delivering up to 5.0 GT/s per lane for graphics or high-speed add-in cards.
Which power connectors must be plugged in for the 14+2+1 duet rail power system to function?
Two 8-pin CPU power connectors are required; both must be seated for the 14+2+1 phase design to deliver full current.
How is the M.2 Shield Frozr installed and which step is often missed?
Remove the protective film from the thermal pad, place the shield over the M.2 drive, then secure it with the supplied screw — skipping the film removal leaves an air gap that ruins heat transfer.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



