We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
MSA SFP2267504 anchorage connector strap with galvanized cable and D-ring attachment

MSA

MSA SFP2267504 Anchorage Connector Strap, Galvanized Cable, Personal Protective Equipment

SKU CH-BSAK-X25NM MPN SFP2267504

Anchorage connector strap with galvanized cable rated for 310 lb capacity and 5,000 lb tensile strength, meeting ANSI Z359.1 and OSHA standards

  • MaterialHAWA
  • ANSI Z359.1 compliant for fall protection confidence
  • 5,000 lb tensile strength withstands heavy loads
  • 310 lb worker capacity supports single-user safety
  • Reusable pass-through mounting enables quick anchor setup
  • Galvanized steel D-ring resists corrosion in harsh environments

Anchorage Connector Strap

The MSA SFP2267504 is a personal protective equipment anchorage connector strap designed for fall protection. It features a galvanized cable construction with a pass-through D-ring end for secure tie-off. The strap meets ANSI Z 359.1 and OSHA standards for a single worker. It provides a reusable anchor point with a 310 lb weight capacity.

Replaces worn or damaged tie-off adapters

This strap replaces an existing anchorage connector that shows wear, corrosion, or failed inspection. The jump is worth it when the current anchor lacks a pass-through D-ring or does not meet the required 5,000 lb tensile strength. It upgrades the attachment point for compatibility with a pole hook type carabiner.

Limited to single-user fall arrest

The standard interface supports one worker per system with a maximum capacity of 310 lb. It does not accommodate multiple simultaneous users or loads exceeding the rated tensile strength. The galvanized cable and polyester anchor material dictate the environmental and chemical resistance limits. No wear pad is included for abrasion protection.

Highlights

  • ANSI Z359.1 compliant for fall protection confidence
  • 5,000 lb tensile strength withstands heavy loads
  • 310 lb worker capacity supports single-user safety
  • Reusable pass-through mounting enables quick anchor setup
  • Galvanized steel D-ring resists corrosion in harsh environments

Specifications

BrandMSA
ModelSFP2267504
MaterialHAWA

Questions about this item

What is the overall length of the anchorage connector strap and how does the pass-through mounting work?

The strap is 4 ft long and uses a pass-through end D-ring that wraps around the anchor point and feeds back through itself to create a secure choker connection.

How do I attach the carabiner to the D-ring without cross-gate loading?

Open the carabiner gate, insert it through the D-ring attachment point, then close and lock the gate so the load pulls along the spine, not across the gate.

When should I replace the strap based on the 5,000 lb tensile strength and 310 lb capacity?

Remove from service immediately if webbing shows cuts, abrasion, chemical damage, or if the D-ring or carabiner is deformed, corroded, or fails a competent-person inspection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.