We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White polyethylene hard hat with front brim, side slots and four-point ratchet suspension

MSA

MSA 477477 Hard Hat Front Brim Slotted 4-Point Ratchet White

SKU CH-H9JZ-F4QG5 MPN 477477

White polyethylene hard hat with front brim, four-point ratchet suspension and side slots, meeting ANSI/ISEA Z 89.1 2014 and CSA Z 94.1 2005 Class E standards

  • MaterialPolyethylene
  • ANSI/ISEA Z89.1-2014 and CSA Z94.1-2005 Class E certified protection
  • 4-point ratchet suspension adjusts quickly for a secure fit
  • Side slots accept face shields, hearing protection and other accessories
  • Lightweight polyethylene shell reduces neck strain during long shifts
  • Front brim design deflects falling debris and glare from the face

Front-Brim Hard Hat for Head Protection

The MSA 477477 is a Type 1, Class E hard hat built with a front brim and a polyethylene shell. It meets ANSI/ISEA Z 89.1-2014 and CSA Z 94.1-2005 standards for impact and electrical protection. The four-point ratchet suspension adjusts to fit head sizes 6 through 7-1/8.

Suited for General Worksite Use

Workers needing ANSI Type 1 top-impact protection and Class E electrical insulation up to 20 000 volts will find this hat appropriate. The slotted sides accept common accessory attachments such as face shields or hearing protection. Buyers who require a full brim for sun and rain runoff, or a vented shell for airflow, should look at a different model.

Four-Point Ratchet Suspension System

The defining specification is the four-point ratchet suspension that lets the wearer tighten or loosen the fit with a simple turn of the knob. This mechanism distributes force across four contact points and allows quick, one-handed adjustment without removing the hat. If a pin-lock or fewer suspension points are preferred, this is not the correct part.

Highlights

  • ANSI/ISEA Z89.1-2014 and CSA Z94.1-2005 Class E certified protection
  • 4-point ratchet suspension adjusts quickly for a secure fit
  • Side slots accept face shields, hearing protection and other accessories
  • Lightweight polyethylene shell reduces neck strain during long shifts
  • Front brim design deflects falling debris and glare from the face

Specifications

BrandMSA
Model477477
MaterialPolyethylene

Questions about this item

Will the side slots on the MSA 477477 accept the same accessory clips I use on my current hard hat?

The side slots follow the standard accessory mounting pattern used on V-Gard helmets, so most existing face-shield, hearing-protection and lamp brackets will fit without modification.

How can I confirm the ratchet suspension is holding the shell at the correct clearance after I put it on?

Tighten the ratchet until the helmet feels secure, then check that a finger can slide between the shell and the suspension crown; the 4-point system maintains the required impact gap when properly adjusted.

Does the 477477 come with a chin strap or sweatband, or do I need to order them separately?

The box contains only the polyethylene shell and the 4-point ratchet suspension; chin straps, sweatbands and any slot-mounted accessories are sold separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.