We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White front-brim hard hat with ratchet suspension, smooth polycarbonate shell

MSA

MSA 475385 Front Brim Hard Hat Ratchet White personal protective equipment

SKU CH-MAZK-BERQ4 MPN 475385

Front-brim hard hat with a 4-point ratchet suspension meets ANSI/ISEA Z89.1-2014 and CSA Z94.1-2005 Class E standards

  • ANSI Type 1 Class E rated for impact and electrical protection
  • Ratchet 4-point suspension adjusts quickly for a secure fit
  • Polycarbonate shell resists penetration and deformation
  • Front brim design shields eyes from glare and falling debris
  • Meets ANSI/ISEA Z89.1-2014 and CSA Z94.1-2005 Class E standards

Front-Brim Hard Hat — Ratchet Adjustment

The MSA 475385 is a Type 1, Class E hard hat built with a polycarbonate shell and a front brim. Its four-point ratchet suspension lets the wearer dial in a secure fit without removing the helmet. The hat meets ANSI/ISEA Z89.1-2014 and CSA Z94.1-2005 standards for impact and electrical protection.

Workers needing front-brim Type 1 Class E protection

This helmet suits crews who require a front brim for forward glare reduction and a ratchet fit system for quick adjustment. It is not for buyers who need a full brim for all-round sun and rain deflection, nor for those who require a vented shell for hot environments.

ANSI/ISEA Z89.1-2014 Type 1 Class E certification

The single specification that decides suitability is the standard marking: ANSI/ISEA Z89.1-2014 Type 1 Class E and CSA Z94.1-2005 Class E. Only sites or tasks that call for this exact classification should select this model.

Highlights

  • ANSI Type 1 Class E rated for impact and electrical protection
  • Ratchet 4-point suspension adjusts quickly for a secure fit
  • Polycarbonate shell resists penetration and deformation
  • Front brim design shields eyes from glare and falling debris
  • Meets ANSI/ISEA Z89.1-2014 and CSA Z94.1-2005 Class E standards

Specifications

BrandMSA
Model475385

Questions about this item

How often should the 4-point ratchet suspension be inspected or replaced?

Inspect the suspension before each use for cracks, fraying or loss of tension; replace it immediately if any damage is found or after a significant impact, as the suspension absorbs the force that would otherwise reach the head.

Which standard limits the shell’s service life under daily UV exposure?

ANSI/ISEA Z 89.1-2014 and CSA Z 94.1-2005 Class E require the polycarbonate shell to be retired no later than five years from the date of manufacture, or sooner if the surface becomes chalky, brittle or discoloured.

Does the non-vented polycarbonate shell trap heat during a full shift?

The solid shell blocks airflow, so heat can build up in hot environments; wearers often add a moisture-wicking liner or take regular shade breaks to manage temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.