We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue front-brim hard hat with ratchet suspension

MSA

MSA 475359 Front Brim Hard Hat Ratchet Suspension Blue

SKU CH-TF9X-3N162 MPN 475359

Front-brim hard hat with four-point ratchet suspension meets ANSI Z89.1-2014 and CSA Z94.1-2015 Class E standards

  • MaterialPolyethylene
  • ANSI Z89.1-2014 and CSA Z94.1-2015 certified protection for electrical and impact hazards
  • Four-point ratchet suspension adjusts quickly for a secure fit across sizes 6-1/2 to 8
  • Front brim design shields eyes and face from sun glare and falling debris
  • Side accessory slots accept hearing protection and face shields for task-specific configurations
  • Durable polyethylene shell resists cracking and deformation in demanding industrial environments

MSA V-Gard Front Brim Hard Hat

The MSA V-Gard 475359 is a Type 1, Class E protective helmet built from polyethylene with a front brim. It meets ANSI Z89.1-2014 and CSA Z94.1-2015 standards for industrial head protection. The four-point ratchet suspension adjusts to fit hat sizes 6-1/2 through 8 for a secure fit.

Workers needing standard top-impact

This hard hat suits crews on construction sites, utilities, and general industry where overhead hazards and electrical contact up to Class E ratings are the primary concerns. It does not serve buyers who need vented cooling for high-heat environments or high-visibility colour options for low-light traffic zones.

Four-point ratchet suspension sizing

The suspension system adjusts across the 6-1/2 to 8 hat-size range using a ratchet knob for tool-free tightening. Side accessory slots accept compatible face shields or hearing protection. Verify the wearer's hat size falls within this range before purchase.

Highlights

  • ANSI Z89.1-2014 and CSA Z94.1-2015 certified protection for electrical and impact hazards
  • Four-point ratchet suspension adjusts quickly for a secure fit across sizes 6-1/2 to 8
  • Front brim design shields eyes and face from sun glare and falling debris
  • Side accessory slots accept hearing protection and face shields for task-specific configurations
  • Durable polyethylene shell resists cracking and deformation in demanding industrial environments

Specifications

BrandMSA
Model475359
MaterialPolyethylene
Shipping weight0.39 kg
Package size25 × 25 × 25 mm

Questions about this item

How often should the 4-point ratchet suspension be inspected and replaced on the MSA 475359 hard hat?

Inspect the ratchet suspension before each use for cracks, fraying or loss of adjustment; replace the suspension assembly at least every twelve months or immediately if any component shows wear or damage.

What is the first protection limit reached during sustained impact exposure on the MSA 475359?

The shell is certified to ANSI Z89.1-2014 Type 1 and CSA Z94.1-2015 Class E, so the top-impact and electrical-insulation thresholds are the limiting factors under continuous severe use.

How much heat builds up inside the MSA 475359 when worn all day in direct sun?

The polyethylene shell has no venting, so solar gain and body heat accumulate; the 4-point ratchet allows a loose fit for airflow, but the hat itself provides no active cooling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.