We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue polyethylene hard hat with front brim and American flag graphics

MSA

MSA 10052945 Front Brim Hard Hat Polyethylene

SKU CH-2FJJ-VQMVQ MPN 10052945

Front brim hard hat in polyethylene with ratchet suspension, side slots for accessories, and ANSI and CSA compliance

  • MaterialPolyethylene
  • ANSI Z89.1-2014 & CSA Z94.1-2015 certified protection
  • Ratchet 4-point suspension for secure fit
  • Polyethylene shell resists impact and penetration
  • Front brim design shields face from sun and rain
  • Side accessory slots accept hearing and face protection

MSA Freedom Series Hard Hat

The MSA 10052945 is a Type 1 Class E hard hat built from polyethylene for front-brim head protection. It meets ANSI Z89.1-2014 and CSA Z94.1-2015 standards for impact and electrical insulation. The hat fits head sizes 6-1/2 to 8 and features a blue shell with American flag graphics. It is designed for workers needing certified overhead protection.

Ratchet Suspension And Side Slots

A four-point ratchet suspension lets the wearer tighten or loosen the fit with one hand while wearing gloves. Side accessory slots accept compatible face shields, hearing protection or lamp brackets without drilling the shell. The slotted design keeps the helmet compliant while adding versatility for changing job-site requirements. No ventilation ports are included.

Polyethylene Shell With Fixed Front Brim

The one-piece polyethylene shell resists cracking and deformation under normal impact loads. A fixed front brim deflects falling debris and rain away from the face without adding moving parts that can snag. The non-vented construction maintains Class E electrical rating up to 20 000 volts. Blue high-visibility colour and flag graphics remain moulded into the material.

Highlights

  • ANSI Z89.1-2014 & CSA Z94.1-2015 certified protection
  • Ratchet 4-point suspension for secure fit
  • Polyethylene shell resists impact and penetration
  • Front brim design shields face from sun and rain
  • Side accessory slots accept hearing and face protection

Specifications

BrandMSA
Model10052945
MaterialPolyethylene

Questions about this item

When should I replace the 4-point ratchet suspension on the MSA 10052945?

Replace the suspension if the ratchet mechanism slips, the headband cracks or the webbing frays; MSA recommends inspecting it before every shift and swapping it at the first sign of wear.

What is the first protection limit reached during continuous high-heat exposure?

The hat meets ANSI Z89.1-2014 Type 1 Class E and CSA Z94.1-2015, so its certified performance ceiling is the impact and penetration thresholds those standards define for non-vented polyethylene shells.

How much heat builds up inside the non-vented shell during all-day wear?

Because the shell has no venting, body heat and solar load stay trapped; wearers typically add a sweatband or take shade breaks to manage temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.