We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
MSA anchorage connector strap, 36 inch polyester webbing with steel D-ring and carabiner

MSA

MSA 10042792 Anchorage Connector Strap 36 In personal protective equipment

SKU CH-XCFQ-D1N2K MPN 10042792

Anchorage connector strap with 36 in polyester webbing and steel D-ring rated for 310 lb capacity meeting ANSI Z359.1 and OSHA standards

  • MaterialHAWA
  • 36-inch polyester strap fits wide anchor points
  • 5,000 lb tensile strength handles heavy fall loads
  • 310 lb worker capacity meets ANSI Z359.1
  • Steel D-ring and carabiner enable quick pass-through tie-off
  • Reusable anchor installs without permanent mounting hardware

Anchorage Connector Strap, 36 In

The MSA 10042792 is a reusable anchorage connector strap designed for fall protection. It provides a secure tie-off point with a pass-through D-ring and pole hook adapter. The polyester webbing meets ANSI Z359.1 and OSHA standards for personal protective equipment.

Workers needing a single-person tie-off anchor

This strap suits workers requiring a 310 lb capacity anchor with a 5,000 lb tensile strength for reusable installations. It is not for crews needing multi-worker systems or anchors with integrated wear pads for abrasive surfaces.

36-inch overall length with pass-through D-ring

The fixed 3 ft length determines the reach to your anchorage structure and the clearance needed below the worker. Verify this distance matches your specific fall clearance calculations before use.

Highlights

  • 36-inch polyester strap fits wide anchor points
  • 5,000 lb tensile strength handles heavy fall loads
  • 310 lb worker capacity meets ANSI Z359.1
  • Steel D-ring and carabiner enable quick pass-through tie-off
  • Reusable anchor installs without permanent mounting hardware

Specifications

BrandMSA
Model10042792
MaterialHAWA

Questions about this item

What ANSI standard does the 10042792 strap meet and what load does it limit?

The strap meets ANSI Z 359.1 and is rated for a 310 lb worker capacity with a 5,000 lb tensile strength.

What length and width must the structure accommodate for this pass-through anchor?

The strap is 36 in long with 1 3/4 in webbing and a 4 1/2 in overall width at the D-ring end.

How is the PointGuard strap installed on a cross-arm and which orientation is often reversed?

Pass the small D-ring through the large D-ring to choke the strap around the beam; the large D-ring must face outward for the carabiner connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.