We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow aluminium audio mixer with cold shoe mount and dual control knobs

Movo

Movo SR-AX100 Yellow audio mixer & cold shoe hub

SKU CH-5T0Z-WC1A6

Passive audio mixer with three 3.5 mm inputs, stereo output, dual gain knobs and three cold-shoe mounts for on-camera accessories

  • TypeAccessory
  • Mix two mics and a stereo source via three 3.5 mm inputs
  • Mount mics, lights or recorders on three integrated cold shoes
  • Passive aluminium circuit adds no noise and needs no batteries
  • Dual level knobs and mono/stereo switch give quick on-camera control
  • Compact 7.6 × 5.9 × 5.5 cm body weighs just 153 g

Compact mixer and mounting hub for DSLR audio

The Movo SR-AX100 attaches to a standard hot-shoe and provides one 3.5 mm stereo input plus two 3.5 mm mono inputs for microphones or wireless receivers. A single TRS stereo output feeds the camera's aux mini-jack. Dual control knobs and a mono/stereo switch let you balance levels without menus. The passive circuit operates without batteries.

Three integrated cold shoes for accessory stacking

Three built-in mounting shoes sit on top of the aluminium chassis so you can attach microphones, recorders or lights directly to the mixer. This keeps the rig compact and centred over the camera rather than spreading gear across multiple brackets. The aluminium body weighs 153 g and measures 7.6 x 5.9 x 5.5 cm.

Passive circuitry stays clean during long takes

Because the signal path uses no active electronics, the unit adds virtually no self-noise even during extended recording sessions. Frequency response reaches 10 Hz to 100 kHz within a tolerance of 1.5 dB and the input level is rated at -35 dBu. There is no battery to drain or preamp to overheat, so performance remains consistent from the first minute to the last.

Highlights

  • Mix two mics and a stereo source via three 3.5 mm inputs
  • Mount mics, lights or recorders on three integrated cold shoes
  • Passive aluminium circuit adds no noise and needs no batteries
  • Dual level knobs and mono/stereo switch give quick on-camera control
  • Compact 7.6 × 5.9 × 5.5 cm body weighs just 153 g

Specifications

TypeAccessory

Questions about this item

What does the -35 dBu input level mean when I plug microphones into the mixer?

The -35 dBu input level matches typical microphone signals, so the two mono and one stereo 3.5 mm inputs accept mic or wireless receiver outputs directly without overloading the passive circuit.

What does the 3.5 mm TRS stereo output connect to and what does it carry?

The single 3.5 mm TRS stereo output feeds a DSLR, camcorder or recorder aux input and carries a mixed stereo signal from the three input channels, selectable via the mono/stereo switch.

How does the unit attach to the camera and what extra shoes does it provide?

It mounts on the camera hot shoe and adds three integrated cold shoes for microphones, wireless receivers or lights, measuring 7.6 x 5.9 x 5.5 cm and weighing 153 g.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.