We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Movo

Movo MC6 3.5mm TRS to TRS 20-foot camera accessory

SKU CH-GEF8-7QQMJ

A 20-foot 3.5mm TRS stereo cable links microphones or mixers to cameras and recorders with gold-plated connectors

  • TypeAccessory
  • 20-foot cable gives freedom to position microphones away from the camera
  • Gold-plated 3.5 mm TRS connectors resist corrosion for reliable signal transfer
  • Shielded construction reduces electromagnetic interference during recording
  • Connects mixers or microphones directly to DSLR cameras and recorders
  • Impedance-matched design preserves audio quality over the full length

Connection cable for external audio sources

The Movo MC6 is a 20-foot cable that links a microphone or mixer with a 3.5 mm TRS output to a camera or recorder that also uses a 3.5 mm TRS input. It is intended for video creators who need to place the audio source farther from the recording device than a standard short lead allows. The gold-plated connectors and shielded, impedance-matched construction help preserve signal quality over the extended run.

Extended reach and signal integrity

At 20 feet the cable provides enough length for interview setups, on-camera talent with a belt-pack mixer, or a boom operator positioned away from the camera. The stereo TRS wiring matches the pinout found on most DSLR and mirrorless microphone jacks, so the connection works without adapters. Beyond this length the fixed cable cannot be extended further without adding a coupler, which would introduce an extra connection point.

Gold-plated connectors and shielded build

The gold plating on both male plugs resists oxidation and maintains low contact resistance over repeated insertions. Shielded, impedance-matched cable reduces the risk of radio-frequency interference and hum when the lead runs near power cables or lighting equipment. These features are built into the cable itself; no additional software, adapters or accessories are included in the package.

Highlights

  • 20-foot cable gives freedom to position microphones away from the camera
  • Gold-plated 3.5 mm TRS connectors resist corrosion for reliable signal transfer
  • Shielded construction reduces electromagnetic interference during recording
  • Connects mixers or microphones directly to DSLR cameras and recorders
  • Impedance-matched design preserves audio quality over the full length

Specifications

TypeAccessory

Questions about this item

Will the 20-foot cable reach from my mixer to the camera without signal loss?

The 20-foot length is designed for extended runs between mixers or microphones and cameras or recorders, using shielded, impedance-matched construction to maintain signal integrity.

How can I verify the gold-plated connectors are making proper contact after I plug them in?

With both 3.5 mm TRS plugs fully seated, monitor the audio levels on your camera or recorder; clean, noise-free input confirms the gold-plated contacts are engaged.

Does the box include any adapters for TRRS microphones or do I need to buy them separately?

The cable provides two male 3.5 mm TRS connectors only; a separate TRRS-to-TRS adapter is required for microphones with a TRRS plug.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.