We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled 3.5mm TRS to TRS audio cable, gold connectors, 20in extended

Movo

Movo MC1 3.5mm TRS-TRS Coiled Camera Cable 20in

SKU CH-BGJC-1BTT1

Coiled 3.5 mm TRS cable links microphones or mixers to cameras, stretching to 20 in with gold-plated connectors

  • TypeAccessory
  • Connects microphones to cameras via 3.5mm TRS
  • Coiled design stretches to 20 inches when needed
  • Gold-plated connectors resist corrosion for clear audio
  • Shielded, impedance-matched cable reduces signal interference
  • Compact 13 cm retracted length keeps rigs tidy

Connectivity and Use Cases

The Movo MC1 is a 3.5mm male TRS to male TRS coiled cable built to link microphones or audio mixers to DSLR cameras, camcorders or recorders. Gold-plated connectors and shielded, impedance-matched construction aim to preserve signal quality. It expands to 20 inches for flexible placement on rigs or handheld setups. The cable carries a one-year warranty with U.S.-based support.

Who This Suits

Videographers and content creators who need a short, tidy TRS-to-TRS link between a microphone or mixer and a camera will find the coiled design reduces clutter. Users requiring a TRRS microphone input or a longer straight cable should look elsewhere, as this cable provides only a TRS output and a 20-inch maximum reach.

Key Specification

The cable terminates in 3.5mm male TRS connectors at both ends and stretches to 20 inches when fully expanded. This length and connector combination determine whether it fits your specific microphone-to-camera routing.

Highlights

  • Connects microphones to cameras via 3.5mm TRS
  • Coiled design stretches to 20 inches when needed
  • Gold-plated connectors resist corrosion for clear audio
  • Shielded, impedance-matched cable reduces signal interference
  • Compact 13 cm retracted length keeps rigs tidy

Specifications

TypeAccessory

Questions about this item

What connectors does the Movo MC1 cable use for the microphone and camera ends?

Both ends have a 3.5 mm male TRS stereo plug; one connects to a mixer or microphone output and the other to a camera or recorder input.

How do you route the coiled section so it does not pull on the camera's 3.5 mm jack?

Leave a small slack loop near the camera before stretching the coil to the mixer, preventing tension on the jack.

When should the cable be replaced if the gold-plated contacts show wear?

Replace it when intermittent audio or crackling appears during movement, indicating contact degradation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.