We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black alloy steel swing arm with laptop tray and VESA plate, clamp and grommet base

MOUNTUP swing arm 14-17" laptop 32" monitor 2.2-22 lbs

SKU CH-X6JM-B46WV GTIN 6972668845078

A dual-purpose swing arm holds a 14-17 inch laptop or a 32 inch monitor weighing 2.2-22 lbs with full motion adjustment and clamp or grommet mounting

  • MaterialAlloy Steel
  • FinishBlack
  • StyleWithout Pole
  • Description6972668845078, MOUNTUP, 3 year warranty, Tabletop Mount
  • Snap laptop in or out quickly with secure locking tray
  • Tilt +90°/-45°, swivel ±90°, rotate ±180° for any viewing angle
  • Holds 14-17″ laptop or up to 32″ monitor at 2.2-22 lbs
  • Height adjusts 5.1″-17.3″ with 21.2″ max extension, tested 2000 cycles
  • Clamp or grommet fits 0.39″-2.76″ desks, cable management saves 80% space

Dual-device mount for laptop and monitor

This swing arm holds a 14-17 inch laptop on its tray and supports a separate screen up to 32 inches. It handles weights from 2.2 to 22 lbs using a 75x75 mm or 100x100 mm VESA interface. The alloy steel construction attaches via C-clamp or grommet to desks between .39 and 2.76 inches thick.

Replaces separate laptop riser and monitor arm

Instead of a fixed stand and a single-articulation arm, this unit combines both functions in one clamp. The jump is worth it when you switch between a 17 inch notebook and a 32 inch external display daily and need the tray's quick-release locking tab for rapid transitions.

Handles 2.2-22 lbs with 21.2 inch reach

The arm lifts screens from 5.1 to 17.3 inches high and extends 21.2 inches, covering dual-monitor workflows, coding sessions, and creative reviews. It runs out when the display exceeds 32 inches, the laptop is larger than 17 inches, or the load falls below 2.2 lbs or above 22 lbs.

Highlights

  • Snap laptop in or out quickly with secure locking tray
  • Tilt +90°/-45°, swivel ±90°, rotate ±180° for any viewing angle
  • Holds 14-17″ laptop or up to 32″ monitor at 2.2-22 lbs
  • Height adjusts 5.1″-17.3″ with 21.2″ max extension, tested 2000 cycles
  • Clamp or grommet fits 0.39″-2.76″ desks, cable management saves 80% space

Specifications

BrandMOUNTUP
Model6972668845078
MaterialAlloy Steel
FinishBlack
StyleWithout Pole
Description6972668845078, MOUNTUP, 3 year warranty, Tabletop Mount

Questions about this item

What desk thickness and grommet hole size does the C-clamp and grommet mount accept?

The C-clamp fits desks from 0.39" to 2.76" thick. The grommet mount fits the same desk thickness range and requires a hole diameter between 0.39" and 2.36".

How do I set the gas-spring tension for my specific monitor weight?

The arm ships at medium tension. After mounting your display, use the provided Allen key on the tension bolt — turn toward the plus sign for heavier screens up to 22 lbs, toward the minus sign for lighter ones down to 2.2 lbs — until the arm holds position without drifting.

Which parts should I inspect or replace after extended use?

Check the gas-spring cylinder for loss of lift force after roughly 2,000 cycles, verify the VESA 75x75 mm and 100x100 mm screws remain tight, and ensure the cable-management clips have not cracked from repeated routing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.