We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black single-arm TV wall mount with articulating joints and a slide-in VESA plate, shown extended from the wall

Mount-It

Mount-It RV Swivel TV Mount 22-43" 33 lbs

SKU CH-M1YX-ZPGN4

Full-motion RV TV mount with locking arm, 15.3-inch extension, 180-degree swivel and 90-degree tilt range for 22-to-42-inch screens up to 33 lbs

  • Mount StyleVehicle Mount
  • ColorBlack
  • TV Size Capacity< 40"
  • TV Weight CapacityMax. load 40 lbs.
  • VESA CompatibleYes
  • Swivel Range90
  • Locking mechanism secures TV during transit vibration
  • Full-motion arm extends 15.3 inches for flexible viewing
  • Tilt range 55° up and 35° down reduces glare
  • Swivels 180° for optimal angle from any seat
  • Fits 22 to 42 inch screens with VESA 75, 100, 200 patterns

Vehicle-specific mount

The Mount-It RV Swivel TV Mount is built for mobile environments such as RVs, motor homes and boats. It accepts screens from 22 to 42 inches and supports VESA patterns of 75x75, 100x100, 200x100 and 200x200 mm. A locking gear structure with a fixing knob secures the display against vibration while the vehicle is in transit. The arm extends from 3 to 15.3 inches and folds flat when not in use.

Installation requirements

The mount attaches to a reinforced wall or bulkhead capable of holding the combined weight of the bracket and display. A 33 lb load limit means most compact TVs in the supported size range can be used without additional reinforcement. The slide-in TV plate simplifies hanging the screen once the wall plate is secured. No power or data connections are involved; the unit is purely mechanical.

Thermal and acoustic profile

As a passive mechanical mount the product generates no heat, draws no power and produces no operational noise. The only audible feedback comes from the adjustment knobs when setting tilt from +55 to -35 degrees or swivelling through 180 degrees. Once locked, the mechanism remains silent and stable regardless of vehicle movement.

Highlights

  • Locking mechanism secures TV during transit vibration
  • Full-motion arm extends 15.3 inches for flexible viewing
  • Tilt range 55° up and 35° down reduces glare
  • Swivels 180° for optimal angle from any seat
  • Fits 22 to 42 inch screens with VESA 75, 100, 200 patterns

Specifications

Mount StyleVehicle Mount
ColorBlack
TV Size Capacity< 40"
TV Weight CapacityMax. load 40 lbs.
VESA CompatibleYes
Swivel Range90
Tilt Range55

Questions about this item

Will the arm's 33 lbs load capacity hold a 40 lb TV safely?

The arm is rated for 33 lbs maximum load; a 40 lb TV exceeds that limit and should not be mounted on this unit.

How much heat or noise does the mount generate during all-day use?

The mount has no moving parts, fans or electronics, so it produces no heat and no noise during continuous operation.

What VESA patterns must my TV already have to fit this mount?

The included slide-in plate supports 75x75, 100x100, 200x100 and 200x200 mm VESA hole patterns.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.