We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black low-profile TV wall mount, slim metal bracket with nail holes, sits 1.2" from wall

Mount-It

Mount-It No Stud TV Mount 32-80" 110 lbs 1.2" profile

SKU CH-5WTS-2V15P

Mounts 32 to 80 inch TVs up to 110 lbs on drywall without studs using included nails, sitting 1.2 inches from the wall

  • ColorBlack
  • TV Size Capacity< 110"
  • VESA Compatible110 LBS
  • Distance from Wall1.2"
  • Tilt Range5 Degrees
  • Mounts TVs 32-80" without finding studs
  • Holds up to 110 lbs on drywall with nails
  • Sits only 1.2" from wall for slim look
  • Fits VESA 100, 200, 300, 400, 600 mm
  • Installs with included hardware — no drilling needed

No-stud mounting for 32-80 inch TVs

This low-profile TV mount attaches to drywall without locating studs or drilling holes. It hangs like a picture frame using included nails and supports screens up to 80 inches weighing no more than 110 lbs. The design keeps the display just 1.2 inches from the wall for a flush appearance.

Included hardware enables tool-light installation

The package supplies the wall mount, all necessary installation hardware and clear instructions so the unit can be secured with a hammer alone. Nails fit into pre-drilled holes on the bracket, though some may need extra force to seat fully. No separate drill or stud finder is required for typical drywall mounting.

Fixed low-profile limits adjustability

The mount holds the screen at a constant 1.2 inch distance from the wall and offers only 5 degrees of tilt. There is no swivel, extension or height adjustment, so cable access behind the TV remains restricted. VESA patterns supported are 100, 200, 300, 400 and 600 mm, but the fixed geometry suits only installations where a single viewing angle is acceptable.

Highlights

  • Mounts TVs 32-80" without finding studs
  • Holds up to 110 lbs on drywall with nails
  • Sits only 1.2" from wall for slim look
  • Fits VESA 100, 200, 300, 400, 600 mm
  • Installs with included hardware — no drilling needed

Specifications

BrandMount-It!
ColorBlack
TV Size Capacity< 110"
VESA Compatible110 LBS
Distance from Wall1.2"
Tilt Range5 Degrees

Questions about this item

Will the included nails or mounting hardware need replacement if the TV is adjusted or removed later?

The mount uses nails driven into pre-drilled holes for installation; removing the TV leaves the nails in the wall, so hardware replacement is only needed if you relocate the mount to a new spot.

What is the maximum VESA pattern this mount supports before the 110 lb weight limit becomes the restricting factor?

The mount accommodates VESA patterns up to 600 mm width, and the 110 lb capacity applies across all supported patterns from 100 mm to 600 mm.

Does the 1.2 inch profile create any heat buildup or ventilation issues when the TV runs all day?

The 1.2 inch stand-off provides a slim gap; heat dissipation depends on the TV's own ventilation design rather than the mount itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.