We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Wall-mounted workstation with monitor arm, foldable keyboard tray and CPU holder in black steel

Mount-It

Mount-It MI-7991 Wall Mount Workstation with Monitor Arm Keyboard Tray CPU Holder office furniture

SKU CH-DSGY-NDH7X

A wall-mounted workstation holds a monitor up to 32 inches, a 26-inch keyboard tray, and a CPU, with gas-spring arms providing 180-degree swivel and 35-degree tilt

  • TypeCommercial Office Furniture
  • Supports 17″–32″ monitors with 75 mm × 75 mm or 100 mm × 100 mm VESA patterns
  • Foldable 26″ keyboard tray holds full-size keyboard and mouse
  • Gas-spring arms enable smooth height and full-motion adjustment
  • 6 lb monitor capacity and 22 lb CPU mount on high-strength steel
  • Tilt 35° up/down and swivel 180° for multi-user ergonomics

Compact wall workstation for shared spaces

This wall mount workstation holds one monitor, a full-size keyboard tray and a CPU holder in a single compact unit. It is built for commercial and industrial environments where several users need access to the same system. The fold-away design keeps walkways clear when the station is not in use. Gas spring arms provide smooth height adjustment for each person.

Check VESA pattern and wall structure before

Verify that the monitor uses a 75mm x 75mm or 100mm x 100mm VESA pattern and falls within the 17 to 32 inch screen range. The monitor arm supports up to 17.6 lb and the CPU mount up to 22 lb, so confirm both devices stay within those limits. Ensure the mounting surface can handle the combined load and that the 26 inch wide by 9.5 inch deep keyboard tray fits the available wall space.

Gas spring arms run silently with no power draw

The monitor and keyboard tray arms use gas spring mechanisms that operate without electricity or fans. Adjustments are quiet and maintenance-free in normal use. Tilt range reaches 35 degrees up and down while swivel covers 180 degrees left and right for flexible positioning. No thermal output or audible noise is produced during operation.

Highlights

  • Supports 17″–32″ monitors with 75 mm × 75 mm or 100 mm × 100 mm VESA patterns
  • Foldable 26″ keyboard tray holds full-size keyboard and mouse
  • Gas-spring arms enable smooth height and full-motion adjustment
  • 6 lb monitor capacity and 22 lb CPU mount on high-strength steel
  • Tilt 35° up/down and swivel 180° for multi-user ergonomics

Specifications

TypeCommercial Office Furniture

Questions about this item

Does the MI-7991 ship with everything needed to mount a monitor, keyboard and CPU, or must I buy any brackets separately?

The unit includes the monitor arm, keyboard tray and CPU holder. It accepts 75mm x 75mm and 100mm x 100mm VESA patterns, so most monitors attach directly without extra brackets.

How do I decide between the VESA patterns and what monitor sizes does the MI-7991 actually support?

Choose the pattern that matches the four holes on the back of your screen — either 75mm x 75mm or 100mm x 100mm. The arm fits monitors from 17" to 32".

The arm is rated at 17.6 lb per arm — what does that mean when I hang a real monitor and adjust it?

Your monitor must weigh 17.6 lb or less. Within that limit the gas spring lets you tilt 35° up or down and swivel 180° left or right while staying in place.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.