We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black gas-spring monitor arm with desk clamp and grommet base, VESA plate attached

Mount-It

Mount-It MI-4761 Single Monitor Arm 32" 17.6 lbs

SKU CH-NM9Q-VEWYS

Holds one screen up to 32 inches and 17.6 lbs with gas-spring height, tilt, swivel and rotation adjustment

  • TypeBracket
  • Fits screens up to 32" with 75mm or 100mm VESA
  • Gas spring adjusts height smoothly across 14.2" range
  • Tilt 35° up or down for comfortable viewing
  • Swivel 360° and rotate 180° for portrait or landscape
  • Clamp and grommet mounts fit desks up to 3" thick

Ergonomic Mount for 32-Inch Displays

The MI-4761 holds a single screen up to 32 inches and 17.6 pounds on 75mm or 100mm VESA patterns. It clamps or grommet-mounts to desks up to three inches thick. The gas-spring arm lets you raise, lower, tilt, swivel and rotate the panel for comfortable viewing. Integrated cable routing keeps cords off the desk surface.

Gas Spring Motion and Stability

The integrated gas spring powers smooth height changes across a 14.2-inch vertical range. The arm extends between 19.5 and 21.5 inches from the mount point. Tilt moves 35 degrees up or down, swivel turns 90 degrees each side, and the screen rotates 180 degrees for portrait or landscape lock. All movement stays firm without drift.

Upgrade from Fixed Stands

This arm replaces a monitor’s stock stand when you need height adjustment, tilt, swivel and rotation in one device. The jump is worth it if your current stand lacks vertical travel or forces a single viewing angle. It is not for users who need dual-screen support or screens heavier than 17.6 pounds.

Highlights

  • Fits screens up to 32" with 75mm or 100mm VESA
  • Gas spring adjusts height smoothly across 14.2" range
  • Tilt 35° up or down for comfortable viewing
  • Swivel 360° and rotate 180° for portrait or landscape
  • Clamp and grommet mounts fit desks up to 3" thick

Specifications

BrandMount-It!
TypeBracket

Questions about this item

How do I attach the MI-4761 arm to a desk that is 3 inches thick, and what step do people often skip?

Choose the clamp or grommet base, tighten the main bolt fully before hanging the monitor, then route cables through the management panel.

Which parts of this gas-spring mount will need checking or replacement after extended use?

The gas spring cylinder and pivot joints should be inspected periodically; if height drift appears, the spring unit is the component to replace.

At what screen weight does the 14.2-inch height travel stop staying in position under daily adjustment?

The arm is rated for 17.6 lbs; loads near that limit will show reduced holding force first during frequent up-down cycles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.