We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black dual-arm articulating TV mount extended to 36 inches showing tilt and swivel joints

Mount-It

Mount-It MI-392 Long Extension TV Mount 36" Arm 40-90" 175 lbs

SKU CH-9H2F-C3DEF

Full-motion dual-arm mount extends 36 inches from the wall, holds 175 lb screens up to 90 inches, and fits VESA patterns from 100×100 to 800×400 mm

  • Mount StyleArticulating/Full Motion
  • ColorBlack
  • TV Weight Capacity175 LBS
  • VESA CompatibleYes
  • Distance from Wall26.2
  • Swivel Range90
  • Extends 36 inches for flexible room placement
  • Swivels 180 degrees across three pivot joints
  • Tilts +10/-5 degrees to reduce glare
  • Supports up to 176 lbs on dual steel arms
  • Fits VESA 100x100 to 800x400 on 16 or 24 inch studs

Mount-It MI-392 Articulating TV Mount

The Mount-It MI-392 is a full-motion TV mount designed for screens from 40 to 90 inches with a weight capacity of 175 lbs. It fits VESA patterns from 100x100mm up to 800x400mm. The dual-arm steel construction supports heavy displays in living rooms, conference rooms or commercial spaces where flexible positioning is required.

36-Inch Extension With Dual-Arm Support

The extra-long arm extends from 3.5 inches up to 36 inches from the wall, allowing deep reach into corners or across wide seating areas. Dual-arm steel construction distributes the 176 lb load evenly across two pivot joints. The wide wall plate anchors into studs spaced 16 or 24 inches apart for a secure installation on standard framing.

VESA 800x400 Limit And Stud Spacing Constraint

The mount accommodates VESA patterns up to 800x400mm, so displays with larger hole patterns cannot be attached. Installation requires wood studs spaced exactly 16 or 24 inches on centre; concrete, steel studs or non-standard spacing need separate hardware not included. The 26.2 inch minimum distance from the wall when fully retracted may limit use in very shallow alcoves.

Highlights

  • Extends 36 inches for flexible room placement
  • Swivels 180 degrees across three pivot joints
  • Tilts +10/-5 degrees to reduce glare
  • Supports up to 176 lbs on dual steel arms
  • Fits VESA 100x100 to 800x400 on 16 or 24 inch studs

Specifications

BrandMount-It!
Mount StyleArticulating/Full Motion
ColorBlack
TV Weight Capacity175 LBS
VESA CompatibleYes
Distance from Wall26.2
Swivel Range90
Tilt Range15

Questions about this item

Will the dual-arm steel joints or gas springs need periodic lubrication or replacement?

The MI-392 uses fixed steel pivot joints with no gas springs, so no lubrication or joint replacement is required.

What stops the 36-inch arm from sagging when a 90-inch TV near the 176-lb limit is fully extended?

The dual-arm steel construction and wide wall plate rated for 176 lbs resist deflection at full 36-inch extension.

Does the mount generate any motor noise or heat during all-day articulated positioning?

The MI-392 is a passive mechanical mount with no motors, so it produces zero noise and zero heat during use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.