We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black gas-spring monitor wall mount with articulated arm and VESA plate

Mount-It

Mount-It MI-3753 Gas Spring Monitor Wall Mount 32" 17.6 lbs

SKU CH-VRJG-ZC9ZN

Gas-spring wall arm holds monitors up to 32 inches and 17.6 lbs with 11 inches of height travel

  • TypeCase
  • SpecificationsBlack, Wall Mount, 90 degrees, 75_x_75_mm, 17.6 pounds, 100_
  • FeaturesWall Mount, Black, 90 degrees
  • Weight2.159 kilograms
  • Gas spring enables effortless 11-inch height adjustment
  • Supports screens up to 32 inches and 17.6 lbs
  • VESA 75×75 and 100×100 compatibility
  • Full motion: ±35° tilt, ±180° swivel, 360° rotation
  • Extends 3.9 to 20.5 inches from wall

Single-monitor wall mount for screens up to 32

The Mount-It MI-3753 gas-spring arm attaches to a wall and holds one display weighing up to 17.6 lbs. It fits VESA 75 x 75 mm and 100 x 100 mm patterns. The arm extends from 3.9" to 20.5" from the wall and provides 11" of vertical height adjustment.

Detachable VESA plate and in-arm cable slots

A quick-release plate lets you mount the screen separately from the arm, simplifying installation. Integrated cable channels route wires inside the arm structure to keep the work surface tidy. The gas-spring tension is adjustable via a hex bolt on top of the arm.

Verify VESA pattern and weight before ordering

Your monitor must use a 75 x 75 mm or 100 x 100 mm VESA hole pattern and weigh 17.6 lbs or less. The wall must support the combined load of mount and display. No desk clamp or grommet base is included — this unit is for wall mounting only.

Highlights

  • Gas spring enables effortless 11-inch height adjustment
  • Supports screens up to 32 inches and 17.6 lbs
  • VESA 75×75 and 100×100 compatibility
  • Full motion: ±35° tilt, ±180° swivel, 360° rotation
  • Extends 3.9 to 20.5 inches from wall

Specifications

BrandMount-It!
ModelMI-3753
Part NumberMI-3753
TypeCase
SpecificationsBlack, Wall Mount, 90 degrees, 75_x_75_mm, 17.6 pounds, 100_x_100_mm, MI-3753
FeaturesWall Mount, Black, 90 degrees
Weight2.159 kilograms

Questions about this item

Will the gas spring on the MI-3753 need its tension re-set after months of daily height changes?

The arm has a hex bolt on top for gas-spring tension; turn it until the 17.6 lbs monitor stays at any height within the 11" range without drifting.

What stops the MI-3753 from extending further when I push the screen out toward me all day?

The arm locks at 20.5" from the wall; beyond that the gas spring and joints reach their mechanical limit.

Does the MI-3753 make any audible hiss or run warm when the monitor stays in one position for hours?

The gas spring is sealed and passive — no pump, fan or motor — so it produces no noise and no measurable heat during static use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.