We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Mount-It

Mount-It MI-2784 Quad Monitor Stand 13-32" 17.6 lbs

SKU CH-RYN1-ZEZR1 MPN MI-2784

A freestanding steel stand holds four 13 to 32 inch screens at 17.6 lbs each with 45 degree tilt, 90 degree swivel and 180 degree rotation

  • TypeMulti-Monitor Stand
  • Holds four 13 to 32 inch screens per VESA 75/100
  • Each arm supports 17.6 lbs for secure mounting
  • 45 degree tilt and 90 degree swivel per monitor
  • Full 180 degree rotation enables portrait or landscape
  • 6 inch steel pole with integrated cable clips

Four-screen freestanding steel stand

The Mount-It MI-2784 is a quad monitor stand built from high-strength steel for desk-mounted use. It supports four screens from 13 to 32 inches with VESA 75x75 or 100x100 patterns. Each arm carries up to 17.6 lbs. The freestanding base sits on any desktop without clamping or bolting.

Height-adjustable arms with full motion

Each pair of arms slides independently on the 35.6 inch pole for height positioning. Every monitor tilts 45 degrees up or down, swivels 90 degrees left or right, and rotates 180 degrees for portrait or landscape orientation. Detachable VESA plates let you attach screens before sliding them onto the brackets. Integrated cable clips route wires along the arms.

Per-screen weight limit

The 17.6 lbs limit per screen restricts use with heavier large-format displays even if they fit the 32 inch size and VESA pattern. The fixed 35.6 inch pole height caps the maximum centre-of-screen elevation, so very tall users or standing desks may not reach ideal eye level. Buyers needing higher reach or heavier loads per arm should look for a different mounting system.

Highlights

  • Holds four 13 to 32 inch screens per VESA 75/100
  • Each arm supports 17.6 lbs for secure mounting
  • 45 degree tilt and 90 degree swivel per monitor
  • Full 180 degree rotation enables portrait or landscape
  • 6 inch steel pole with integrated cable clips

Specifications

TypeMulti-Monitor Stand
Shipping weight8.17 kg
Package size904 × 798 × 279 mm

Questions about this item

What VESA patterns and screen sizes does the MI-2784 support?

The stand accepts 75x75 and 100x100 VESA mounts and fits screens from 13 to 32 inches, each weighing up to 17.6 lbs.

How do I attach the monitors, and what step is often missed?

Fasten the detachable VESA plate to each monitor first, then slide it into the arm bracket and tighten the screw cap; skipping the plate-to-monitor step is the common error.

What upkeep will the stand need over time?

Periodically check and retighten the pole height clamps, arm joints, and VESA screw caps, and keep the steel surfaces and cable clips free of dust.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.