We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal TV wall mount bracket with tilt hinge, low-profile arms and cable clips

Mount-It

Mount-It MI-1121L TV Wall Mount Tilt 37-65in 165lb 1.4in

SKU CH-WSTV-WV11T

Wall mount tilts TVs 37–65 inches up to 15 degrees, holds 165 lbs, and sits 1.4 inches from the wall

  • Mount StyleWall Mount - Tilt
  • ColorBlack
  • TV Size Capacity100
  • Tilt up to 15° for glare-free viewing
  • Fits 37–65 inch screens with 165 lb capacity
  • Low 1.4 inch profile sits close to wall
  • Integrated cable management keeps wires tidy
  • Locking screw secures the TV to the bracket

Mount-It MI-1121L Wall Mount

The Mount-It MI-1121L is a tilt-style wall bracket designed for flat-screen televisions between 37 and 65 inches. It supports a maximum load of 165 lbs and holds the screen just 1.4 inches from the wall. Homeowners who want a low-profile installation with adjustable viewing angles will find this mount suitable. It is not intended for displays larger than 65 inches or heavier than the stated capacity.

Thermals Noise and Power Draw

As a passive mechanical bracket the MI-1121L produces no heat, draws no electricity and operates in complete silence. There are no fans, motors or electronic components to generate noise or require cooling. The 1.4 inch stand-off allows a small air gap behind the television for natural convection. Installers who need active cooling or powered movement should look elsewhere.

Bundled Accessories and Software

The package includes a balance beam, a mounting locking screw and all necessary hardware for wood-stud or concrete installation. A built-in cable management system routes wires neatly along the bracket arms. No software, apps or firmware are supplied or required. Buyers who expect smart-home integration or motorised control will not find those features here.

Highlights

  • Tilt up to 15° for glare-free viewing
  • Fits 37–65 inch screens with 165 lb capacity
  • Low 1.4 inch profile sits close to wall
  • Integrated cable management keeps wires tidy
  • Locking screw secures the TV to the bracket

Specifications

BrandMount-It!
Mount StyleWall Mount - Tilt
ColorBlack
TV Size Capacity100

Questions about this item

How do I install the MI-1121L tilt mount and what is the step people often miss?

Secure the wall plate to studs using the supplied hardware, attach brackets to the TV with the correct VESA pattern up to 100 mm, then hook the TV onto the plate and tighten the mounting locking screw — many forget that final screw.

What maintenance or replacement will the MI-1121L need over time?

The steel arms and tilt mechanism require no routine service; only the cable-management clips may need replacement if they become brittle after years of heat exposure.

What limit appears first when the MI-1121L is used continuously at full tilt?

The 15-degree tilt range is the mechanical stop; the mount holds 165 lbs at any angle within that range, so the angle limit is reached before the weight limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.