Motusamare mo116 PSU Extension Cable Kit 24-Pin 4+4-Pin 6+2-Pin 70cm White
White sleeved extension kit adds 70 cm to 24-pin, 4+4-pin and two 6+2-pin cables with combs for tidy routing
- Length27.56 inches
- Connector DetailMale-to-Female
- SpecificationsVoltage: 600 volts; Current: 15 amps; Connector: Male-to-Fem
- Clean cable routing with 24-pin ATX extension included
- Reliable CPU power via 4+4-pin EPS extension
- Dual GPU support with two 6+2-pin PCIe cables
- Organised builds using 16 supplied cable combs
- High-current capacity rated 15 A at 600 V
Motusamare mo116 Extension Cable Kit
The Motusamare mo116 kit provides individually sleeved extension cables for ATX, EPS and PCIe power connections. It includes one 24-pin ATX cable, one 4+4-pin EPS cable and two 6+2-pin PCIe cables, each measuring 70 cm in length. All cables use UL1015 18AWG wire rated for 600 volts and 15 amps at 105 °C. Black cable combs are supplied for tidy routing.
Builders wanting a clean, white-themed look
This kit suits builders who want a uniform white braided appearance and stiff, shape-holding cables that resist sagging once formed. It is not intended for users who prefer ultra-flexible, heat-shrink-free wires that bend tightly in cramped spaces, nor for systems requiring longer cable runs beyond the supplied 70 cm length.
Verify PSU connector layout and case routing space
Before ordering, confirm that your modular power supply uses standard ATX, EPS and PCIe pin-outs compatible with male-to-female extensions. Ensure the case has enough clearance behind the motherboard tray and around the graphics card to accommodate the wider bend radius of the stiff PET-sleeved wires. Check that the 27.56-inch cable length reaches all components without tension.
Highlights
- Clean cable routing with 24-pin ATX extension included
- Reliable CPU power via 4+4-pin EPS extension
- Dual GPU support with two 6+2-pin PCIe cables
- Organised builds using 16 supplied cable combs
- High-current capacity rated 15 A at 600 V
Specifications
| Brand | Motusamare |
|---|---|
| Model | mo116 |
| Length | 27.56 inches |
| Connector Detail | Male-to-Female |
| Specifications | Voltage: 600 volts; Current: 15 amps; Connector: Male-to-Female; UL Listed: false |
Questions about this item
What existing PSU connectors must I have free for the 24-pin, 4+4-pin and two 6+2-pin extensions to plug into?
You need a free 24-pin ATX, one 4+4-pin EPS and two 6+2-pin PCIe outputs on your modular power supply.
Will the 18 AWG UL1015 wires rated for 600 V and 15 A safely carry power from an older 500 W or 650 W unit?
Yes, the 18 AWG conductors are rated for 15 A at 600 V, which covers the current draw of 500 W to 1000 W supplies listed in the compatibility notes.
How can I confirm the cables are seated correctly after routing them with the included combs?
Check that each 24-pin, 4+4-pin and 6+2-pin connector clicks fully into its socket and that the 4 black 24-pin combs plus 12 black 8-pin combs hold the wires in a clean, rigid curve without sag.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



