Moog
Moog Front/Rear Wheel Hub & Bearing 2011-2020 Ford Explorer 3.5L
A steel wheel hub and tapered bearing assembly for 2011-2020 Ford Explorer 3.5L models with 38 splines and a magnetic ABS ring
- ColorBlack
- Fits 2011-2020 Ford Explorer 3.5L front and rear
- Magnetic ABS ring with 48 teeth enables accurate wheel-speed signals
- 38-spline driven hub matches drivetrain torque requirements
- Pre-set tapered bearings eliminate adjustment and reduce wear
- Four-bolt knuckle pattern with five lug bolts simplifies installation
Ford Explorer Wheel Hub Assembly
This Moog wheel hub and bearing assembly fits 2011 through 2020 Ford Explorer models equipped with the 3.5L engine. It is a new steel unit built with tapered roller bearings and a 38-spline driven hub. The flange uses a 1/2-20 thread pattern with five lug bolts supplied.
Front or Rear Position on Listed Vehicles
The part serves either front or rear positions depending on the model year. It covers the front on 2011 to 2014 Explorers and 2013 to 2018 Police Interceptor Utilities. Rear fitment extends to 2019 for both vehicle lines. Buyers needing an ABS sensor or wiring harness must source those separately.
48-Tooth Magnetic ABS Ring
The integrated magnetic ring carries 48 teeth for wheel-speed signalling. Hub centrebore measures 4.5 inches, flange diameter is 2.68 inches and total hub height is 4.88 inches. Four mounting bolts secure the unit to the knuckle. Verify these dimensions against the original hub before ordering.
Highlights
- Fits 2011-2020 Ford Explorer 3.5L front and rear
- Magnetic ABS ring with 48 teeth enables accurate wheel-speed signals
- 38-spline driven hub matches drivetrain torque requirements
- Pre-set tapered bearings eliminate adjustment and reduce wear
- Four-bolt knuckle pattern with five lug bolts simplifies installation
Specifications
| Color | Black |
|---|
Questions about this item
Does the Moog wheel hub assembly come with the ABS sensor and wiring harness, or do I need to buy them separately?
The hub and bearing unit includes the bearing, hub, mounting bolts and five lug bolts; the ABS sensor and wiring harness are not part of the assembly and must be sourced separately.
How do I know which version fits my 2016 Ford Explorer 3.5L — front or rear?
This part number covers both positions; it fits the rear on every 2011-2019 Explorer and the front on 2011-2014 models, so a 2016 Explorer requires the rear version only.
What does the 38-spline, 48-tooth magnetic ABS ring specification mean for daily driving?
The 38 splines match the Explorer's driveshaft for positive torque transfer, while the 48-tooth magnetic ring provides the wheel-speed signal the stability-control system expects.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
