We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Monoprice Inc.

Monoprice Premier Series 50ft 1/4in TRS Male to Male 2.5mm stereo cable

SKU CH-N194-QSXG3

A 50ft stereo cable with 1/4in TRS male connectors, 16 AWG copper conductors and 97.5% braided shielding for balanced audio runs

  • 50 ft length spans long runs between gear
  • 16 AWG pure copper conductors carry clean signal
  • 5 % braided shield rejects RF and EM noise
  • Gold-plated TRS plugs resist corrosion for lasting contact
  • Balanced design prevents ground-loop hum in pro audio

Premier Series 50ft TRS cable

The Monoprice Premier Series cable runs 50ft with 1/4in TRS male plugs on both ends. It uses 16 AWG stranded pure copper conductors and 97.5% copper braid shielding. The balanced design reduces EM and RF noise while preventing ground loop issues. It suits professional audio gear and stereo phono connections alike.

Studio and stage users needing long balanced runs

Installers linking mixers, interfaces or instruments across a stage or studio will benefit from the low-noise balanced topology and heavy shielding. Buyers who want more storage or require digital data transfer should look at something else. The 2.5mm and 3.5mm labels in the category refer to the product family, not the connectors on this cable.

Simple plug-and-play installation

Push each 1/4in TRS plug firmly into its jack until it seats; no tools or drivers are required. What usually goes wrong is confusing TRS balanced cables with TS unbalanced instrument leads, which changes the signal path and noise rejection. Ensure both devices expect a balanced connection for the intended result.

Highlights

  • 50 ft length spans long runs between gear
  • 16 AWG pure copper conductors carry clean signal
  • 5 % braided shield rejects RF and EM noise
  • Gold-plated TRS plugs resist corrosion for lasting contact
  • Balanced design prevents ground-loop hum in pro audio

Specifications

No published specifications for this item yet.

Questions about this item

What connectors does the 50ft cable need on my equipment?

Each end has a 1/4in TRS male plug, so both devices must accept a 1/4in TRS stereo jack.

Will the 16 AWG conductors work with older 3.5mm or 2.5mm gear?

The cable terminates in 1/4in TRS plugs only; you need adapters to connect 3.5mm or 2.5mm ports.

How can I verify the 97.5% braid shielding is effective after hooking it up?

Listen for hum or RF noise; balanced TRS wiring with 97.5% copper braid should reject ground-loop and electromagnetic interference.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.