We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fibre patch cord with two LC connectors

Monoprice Inc.

Monoprice Inc. OM4 Fibre Optic Cable 1 m Aqua LC/LC 50/125 OFNR Corning 141694

SKU CH-KE4T-6N2T7

A 1 metre OM4 multimode fibre patch cable with LC/LC connectors, aqua jacket and OFNR rating for 10 Gb enterprise links

  • TypeOthers
  • ColorAqua
  • Length1
  • Connector Number2
  • FeaturesMeets EIA/TIA 604-2 with ceramic ferrule for high speed cabl
  • OM4 multimode supports 10 Gbps enterprise throughput
  • Aqua jacket identifies OM4 grade at a glance
  • LC/LC duplex connectors with ceramic ferrules ensure low insertion loss
  • Meets EIA/TIA 604-2 standard for high-speed cabling networks
  • OFNR riser-rated jacket approved for in-building vertical runs

Monoprice OM4 Fibre Optic Cable 1 m Aqua LC/LC

This Monoprice OM4 fibre optic cable is a one metre aqua patch lead terminated with LC connectors on both ends. It uses 50/125 micron Corning multimode glass and carries an OFNR riser rating for in-building runs. The ceramic ferrules meet EIA/TIA 604-2 specifications for high-speed enterprise networks.

Suited to 10 GbE backbone links

The duplex LC/LC layout fits standard transceivers in switches, servers and storage arrays that require OM4 bandwidth at short range. Installers needing SC, ST or MPO interfaces, single-mode fibre or longer reach should select a different cable type.

Low insertion loss and high return loss under

Ceramic ferrules keep attenuation tight and reflections minimal when the link runs at sustained 10 GbE throughput. The OFNR jacket resists flame spread in vertical shafts, maintaining signal integrity during prolonged heavy loads.

Highlights

  • OM4 multimode supports 10 Gbps enterprise throughput
  • Aqua jacket identifies OM4 grade at a glance
  • LC/LC duplex connectors with ceramic ferrules ensure low insertion loss
  • Meets EIA/TIA 604-2 standard for high-speed cabling networks
  • OFNR riser-rated jacket approved for in-building vertical runs

Specifications

BrandMonoprice
Model141694
TypeOthers
ColorAqua
Length1
Connector Number2
FeaturesMeets EIA/TIA 604-2 with ceramic ferrule for high speed cabling networks. Low insertion loss and high return loss, stricter than industry standards.

Questions about this item

What connector type must the equipment already have for this LC/LC cable to plug in?

Both ends use LC duplex connectors, so the switch, server or patch panel must provide matching LC ports.

Will this OM4 50/125 µm cable work with the older OM3 50/125 µm links I am keeping in the same rack?

Yes, OM4 is backward compatible with OM3 at the same core size, so you can mix them in a multi-mode channel without changing transceivers.

How can I verify the link meets the EIA/TIA 604-2 ceramic-ferrule specification after installation?

Run an optical loss test set at the rated wavelength; the insertion loss should be lower than the standard limit cited for the 604-2 compliant ferrules.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.