Monoprice Inc.
Monoprice Inc. Monolith M7100X 7x90W Multi-Channel Amplifier RCA XLR 143866
Seven-channel home-theatre power amplifier delivering 90 watts per channel with both RCA and XLR inputs
- TypeAmplifiers & Receivers
- Weight39.20
- Features7x90 Watts Per Channel
- 7 channels at 90 watts each deliver room-filling power
- RCA and XLR inputs connect balanced and unbalanced sources
- 20 kg chassis provides stable low-vibration operation
- Multi-channel design drives full home-theatre speaker arrays
- Model 143866 identifies the amplifier for support and documentation
Seven-channel 90 W power amplifier
The Monolith M7100X delivers 90 watts per channel across seven channels for home-theatre installations. It accepts both RCA and XLR inputs, giving installers flexibility when connecting pre-amplifiers or processors. The unit weighs 39.20 kg and ships in a black finish. Model number 143866 identifies the hardware for ordering and support.
Ideal for dedicated multi-channel rooms
This amplifier suits owners building a seven-speaker surround system who need balanced and unbalanced input options. It is not intended for buyers who require fewer than seven channels or who only have speaker-level outputs on their source equipment. Installers needing built-in room correction or streaming features should look at integrated receivers instead.
Headroom for reference-level playback
Seven channels driven at 90 watts each provide ample headroom for dynamic movie soundtracks in medium-sized theatres. The design runs out of steam in very large rooms where higher continuous power or more channels are needed for even coverage. Users planning nine- or eleven-channel layouts will need additional amplification.
Highlights
- 7 channels at 90 watts each deliver room-filling power
- RCA and XLR inputs connect balanced and unbalanced sources
- 20 kg chassis provides stable low-vibration operation
- Multi-channel design drives full home-theatre speaker arrays
- Model 143866 identifies the amplifier for support and documentation
Specifications
| Brand | Monoprice |
|---|---|
| Model | 143866 |
| Part Number | 143866 |
| Type | Amplifiers & Receivers |
| Weight | 39.20 |
| Features | 7x90 Watts Per Channel |
Questions about this item
Do I need a preamp or AV processor with both RCA and XLR outputs to use the Monolith M7100X?
The amplifier accepts either RCA or XLR inputs, so a preamp or processor with one of those output types is sufficient.
Will the Monolith M7100X drive my existing 8-ohm speakers safely?
Yes, the amplifier is rated at 90 watts per channel into 8 ohms across all seven channels.
How can I verify each of the seven channels is delivering power after installation?
Connect speakers to every output, play a multi-channel test signal, and listen for clean output from each driver.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Harman dbx ZC-FIRE ZonePRO Fire Safety Interface
- Speakers & Speaker…
Peerless PF630 10-24 inch Flat Wall Mount 80 lb VESA 75 100
- Universal Flat Wall…
- Black



