We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 4-channel XLR snake cable, two male and two female connectors each end, color-coded wires, 6 metre length

Monoprice Inc.

Monoprice Inc. 601394 4-Channel XLR Snake Cable 26AWG 6m

SKU CH-2RTA-B8P4Q MPN 601394

A 6 m four-channel XLR snake with two upstream and two downstream balanced lines, 26 AWG conductors and foil shielding

  • TypePro Audio Cables
  • ColorBlack
  • Length11.400
  • Weight2.79
  • Four balanced lines with colour-coded wires for clear channel identification
  • 26 AWG conductors with aluminium foil shielding reduce EM and RF interference
  • Two upstream and two downstream channels carry audio in both directions
  • Male and female XLR connectors at each end match standard pro audio gear
  • Six-metre length provides flexible routing between rack and stage positions

Four-Channel XLR Snake for Balanced Audio

This 4-channel XLR snake connects two upstream and two downstream audio channels between devices with XLR jacks. It carries four balanced mono or unbalanced stereo lines with colour-coded red, white, green, and blue wires. Each of the 26 AWG conductor pairs is wrapped in aluminium foil shielding to reject EM and RF interference. The 6 metre cable uses 3-pin XLR male and female connectors at both ends.

Replaces Separate Patch Cables in Fixed Rigs

A single snake replaces four individual XLR runs, reducing cable clutter and setup time for studio patches or stage boxes. The jump is worth it when you need two send and two return paths between a mixer, interface, or outboard rack on a permanent or semi-permanent basis. It is not suited for installations requiring more than four channels or for runs exceeding the supplied length.

Four Lines With Foil Shielding for Short Runs

The 26 AWG conductors and foil shield comfortably handle line-level signals over the 6 metre span in typical studio or stage environments. Headroom drops on longer runs or with phantom-powered microphones that demand lower capacitance and heavier gauge wire. Buyers needing extended distances or higher channel counts should look elsewhere.

Highlights

  • Four balanced lines with colour-coded wires for clear channel identification
  • 26 AWG conductors with aluminium foil shielding reduce EM and RF interference
  • Two upstream and two downstream channels carry audio in both directions
  • Male and female XLR connectors at each end match standard pro audio gear
  • Six-metre length provides flexible routing between rack and stage positions

Specifications

BrandMonoprice
Model601394
TypePro Audio Cables
Part Number601394
ColorBlack
Length11.400
Weight2.79

Questions about this item

How much rack depth does the 3-pin XLR connector need behind the patch panel?

Each 3-pin XLR connector needs roughly 60 mm of depth behind the panel; allow a gentle cable bend so the snake does not kink at the jack

Which step is often missed when running the 26 AWG aluminum-foil-shielded snake through conduit?

Pull the four color-coded lines as a single bundle and keep the male and female XLR ends paired so the two upstream and two downstream channels stay matched at both ends

What part of the 6 m snake is most likely to need replacement after heavy stage use?

The 3-pin XLR connectors and the 26 AWG conductor pairs at the strain relief are the wear points; the foil shield and jacket rarely fail unless cut

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.