Monoprice Inc.
Monoprice Inc. 5360 1.5 ft RG6 18AWG 75 Ohm Quad Shield CL2 Coaxial RF Cable White
RG6 coaxial cable with quad shielding and two F-type connectors for 75 ohm video signals
- TypeOthers
- ColorWhite
- Length1.50 ft.
- Connector Number2
- Quad shielding reduces signal loss for clearer video
- 75 ohm impedance matches standard video equipment requirements
- CL2 rating permits safe in-wall installation
- 5 ft length suits short, tidy connections
- Two F-type connectors ready for immediate use
run RG6 cable for indoor installs
This 1.5 ft white coaxial cable carries 75 ohm signals between two F-type connectors. The quad-shield construction resists interference on short runs such as wall-plate to modem or splitter to set-top box. CL2 rating permits in-wall routing where local code allows. It suits installers and homeowners who need a tidy, pre-terminated link without excess slack.
Quad shielding and CL2 jacket for clean routing
Four shielding layers block EMI from nearby power cables while the white CL2-rated jacket meets fire-safety requirements for concealed runs. Two factory-fitted F-type connectors eliminate field termination errors and speed up deployment. The 18 AWG centre conductor handles typical broadband and video frequencies without measurable loss over this length. The short 1.50 ft span keeps cable management simple behind entertainment centres or inside structured-wiring enclosures.
Replaces loose bulk cable and long patch cords
This assembly removes the need to cut, strip and crimp RG6 on site, saving time on single-drop jobs. It also replaces longer patch cables that coil behind equipment and degrade airflow. The jump is worth it when the distance between outlets is under two feet and a permanent, code-compliant connection is required. Buyers needing runs over 1.5 ft or outdoor-rated jackets should select a different length or rating.
Highlights
- Quad shielding reduces signal loss for clearer video
- 75 ohm impedance matches standard video equipment requirements
- CL2 rating permits safe in-wall installation
- 5 ft length suits short, tidy connections
- Two F-type connectors ready for immediate use
Specifications
| Brand | Monoprice |
|---|---|
| Model | 105360 |
| Type | Others |
| Color | White |
| Length | 1.50 ft. |
| Connector Number | 2 |
| Shipping weight | 0.05 kg |
| Package size | 173 × 97 × 36 mm |
Questions about this item
What signal standard does the 75 ohm RG6 cable support, and what bandwidth does that cap in practice?
The 75 ohm impedance matches standard RG6 specifications for video and broadband signals, carrying typical cable TV, satellite and antenna frequencies up to 3 GHz.
What physical space and mounting considerations apply to the 1.5 ft CL2 quad-shield cable?
At 1.5 ft long with dual F-type connectors, the cable fits tight runs behind wall plates or between devices; the CL2 rating allows in-wall routing through stud cavities.
How is the F-type connector installed on this RG6 quad-shield cable, and what step do people get wrong?
The connectors are factory-crimped; users often over-tighten the F-type nut with a wrench, which can crack the connector body — finger-tight plus a slight turn is sufficient.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



