Monoprice Inc.
Monoprice Inc. 50ft 3.5mm Stereo Male-Male Cable Black
A 50ft stereo audio cable with male 3.5mm plugs on both ends for connecting portable devices to auxiliary inputs
- 50 ft length reaches distant audio sources
- 5 mm stereo plugs fit phones and car aux inputs
- Male-to-male design links two 3.5 mm jacks directly
- Molded housings protect the solder joints
- Strain relief boots reduce cable fatigue at the connectors
50ft stereo cable for portable audio
This 50-foot 3.5 mm stereo cable carries analogue left and right channels between two TRS male plugs. It suits listeners who need a long run from a phone or portable player to a car auxiliary input or home receiver. The moulded housings and strain-relief boots protect the solder joints during repeated insertion.
Behaviour on extended runs
Over a 50-foot length the cable maintains stereo continuity without active electronics. Signal level remains adequate for typical consumer line-level sources and auxiliary inputs. No amplification or equalisation is built in, so very low-output devices may sound quieter at the far end.
Thermals noise and power
Passive copper construction generates no heat and draws no power. The cable adds no hiss, hum or digital artefacts to the analogue path. Flexible black jacket resists kinking during routing behind furniture or under carpet.
Highlights
- 50 ft length reaches distant audio sources
- 5 mm stereo plugs fit phones and car aux inputs
- Male-to-male design links two 3.5 mm jacks directly
- Molded housings protect the solder joints
- Strain relief boots reduce cable fatigue at the connectors
Specifications
| Brand | Parts |
|---|---|
| Model | 844660006473 |
| Shipping weight | 3.18 kg |
| Package size | 157 × 157 × 157 mm |
Questions about this item
Does the 50ft length add noticeable resistance or signal loss for all-day audio use?
The 50ft cable uses standard 3.5 mm stereo conductors with molded plugs and strain relief boots; no active electronics are present, so power draw and heat are negligible.
What source and destination devices must I already have to use this male-to-male 3.5 mm cable?
You need a source with a 3.5 mm stereo output — such as a phone or MP3 player — and a destination with a 3.5 mm stereo input — such as a car aux port or powered speakers.
Will this 3.5 mm TRS cable work with older mono 2.5 mm jacks on legacy gear?
No; the connectors are 3.5 mm stereo (TRS) plugs, so they only fit 3.5 mm stereo sockets. They are not compatible with 2.5 mm mono jacks.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



