Monoprice Inc.
Monoprice Inc. 4057 coaxial rf cable 3.00 ft RG6 18AWG 75 Ohm quad shield white
A 3.0 ft RG6 quad-shield coaxial cable with 18 AWG centre conductor, 75 Ohm impedance and 2200 MHz sweep-tested bandwidth for antenna, cable TV or satellite runs
- TypeOthers
- ColorWhite
- Length3.00 ft.
- Connector Number2
- Quad-shield construction rejects interference for cleaner signals
- 18 AWG copper-clad steel conductor maintains strength over 3.00 ft
- 75 Ohm impedance matches TV and satellite systems
- Sweep-tested to 3.0 GHz for reliable high-frequency performance
- CL2 rating permits safe in-wall installation
3 ft RG6 Quad-Shield Coaxial Cable
This 3.00 ft F-type coaxial cable uses an 18 AWG copper-clad steel centre conductor with quad shielding for 75 Ohm impedance. It is built for antenna, cable television and satellite installations where reliable signal transfer is required. Sweep testing confirms performance up to 3.0 GHz at applicable frequencies.
CL2-Rated Low-Loss Construction
The foam polyethylene dielectric and quad-shield design minimise attenuation and resist external interference during normal operation. CL2 rating allows in-wall routing without additional fire-safety measures. No active components are present, so the cable draws no power and produces no noise.
Lifetime Warranty and White Jacket
Monoprice backs the cable with a lifetime warranty, covering defects in materials and workmanship. The white PVC jacket blends with light-coloured baseboards and simplifies identification in structured-wiring bundles. Two factory-fitted F-type connectors are ready for immediate termination.
Highlights
- Quad-shield construction rejects interference for cleaner signals
- 18 AWG copper-clad steel conductor maintains strength over 3.00 ft
- 75 Ohm impedance matches TV and satellite systems
- Sweep-tested to 3.0 GHz for reliable high-frequency performance
- CL2 rating permits safe in-wall installation
Specifications
| Brand | Monoprice |
|---|---|
| Model | 104057 |
| Type | Others |
| Color | White |
| Length | 3.00 ft. |
| Connector Number | 2 |
| Shipping weight | 0.23 kg |
| Package size | 127 × 127 × 25 mm |
Questions about this item
How do I install this 3.00 ft RG6 coaxial cable with its F-type connectors?
Screw each F-type connector clockwise onto the 75 Ohm ports of your antenna, cable TV outlet, or satellite receiver until finger-tight, then give a final eighth-turn with a wrench; the step most people skip is that last snug turn, which prevents signal loss from a loose shield contact.
What maintenance or replacement will this quad-shield 18 AWG cable need over time?
The copper-clad steel centre conductor and foam polyethylene dielectric are sealed inside the quad shield, so no routine maintenance is required; replace the cable only if the white jacket is kinked, crushed, or the F-type connectors become corroded or physically damaged.
At what frequency limit does this 2200 MHz-rated cable show attenuation first under sustained use?
Sweep testing guarantees performance up to 3.0 GHz, but the published 2200 MHz rating is the practical ceiling where insertion loss begins to rise noticeably during continuous high-frequency satellite or broadband signals.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



