Monoprice Inc.
Monoprice Inc. 144677 Cat6A PoE Patch Cable 50ft Black 22AWG 500MHz 90W PoE++ Shielded RJ45
A 50ft Cat6A shielded patch cable delivering 10Gbps data and 90W PoE++ power over pure bare copper 22AWG conductors
- TypeNetworking Patch Cables
- ColorBlack
- FeaturesPoE++ Compliant: Meets PoE standard (IEEE 802.3bt), carry da
- Delivers 90 W power and data over one cable via IEEE 802.3bt PoE++
- 10 Gbps throughput validated by DSX-8000 Fluke testing at 500 MHz
- Shielded RJ45 plugs with 50 µ gold contacts cut EMI/RFI and improve heat dissipation
- 22 AWG pure bare copper conductors lower resistance for reliable runs up to 262 ft
- 50 ft black Cat6A patch lead ready for IP cameras, VoIP phones and wireless APs
50 ft Cat6A PoE patch cable
This 50 ft Cat6A patch cable delivers 10 Gbps data and up to 90 W of power over a single run. It targets installers and IT teams wiring PoE cameras, VoIP phones, wireless access points or AV gear in commercial or home networks.
22 AWG bare copper with shielded RJ45 plugs
Each conductor is 22 AWG pure bare copper for lower resistance and reduced heat. Shielded RJ45 connectors with 50 µ gold contacts suppress EMI and RFI while improving heat dissipation, and the interlocking tab adds mechanical security for dense patch panels.
Replaces separate data and power runs up to 262 ft
The cable meets IEEE 802.3bt PoE++ and passes Fluke DSX-8000 testing at 500 MHz, so it upgrades older Cat5e or non-PoE links that cannot carry 90 W at distance. The jump is worth it when you need full 90 W delivery beyond 260 ft without adding mid-span injectors.
Highlights
- Delivers 90 W power and data over one cable via IEEE 802.3bt PoE++
- 10 Gbps throughput validated by DSX-8000 Fluke testing at 500 MHz
- Shielded RJ45 plugs with 50 µ gold contacts cut EMI/RFI and improve heat dissipation
- 22 AWG pure bare copper conductors lower resistance for reliable runs up to 262 ft
- 50 ft black Cat6A patch lead ready for IP cameras, VoIP phones and wireless APs
Specifications
| Brand | Monoprice |
|---|---|
| Model | 144677 |
| Type | Networking Patch Cables |
| Color | Black |
| Features | PoE++ Compliant: Meets PoE standard (IEEE 802.3bt), carry data and 90W of electricity via single cable to devices to maximize the capabilities, efficiency, saving installation time and costs. |
Questions about this item
Does the Cat6A 500 MHz rating support 10 Gbps over the full 50 ft length?
Yes, the cable is tested to 500 MHz and rated for 10 Gbps data transfer across the entire 50 ft run.
Will the shielded RJ45 plugs fit a standard keystone jack or wall plate?
The shielded RJ45 connectors use the standard 8P8C form factor and snap into any Cat6A-compatible keystone or wall plate.
What is the correct way to terminate the shielded plug so the ground path stays intact?
Seat the plug fully until the latch clicks, ensuring the metal shield tabs contact the jack chassis; a partial insert breaks the ground and invites EMI.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115495BTC
In stock
