We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal ceiling mount with horizontal bar holding two TV brackets, adjustable tilt base, matte finish

Monoprice Inc.

Monoprice Inc. 139662 2x1 Menu Board Ceiling TV Mount 32-65in 66lb VESA 600x400

SKU CH-NRAP-M1AH8 MPN 139662

Ceiling mount holds two 32 to 65 inch screens up to 66 pounds each with VESA up to 600x400 and adjustable tilt

  • NameMonoprice Commercial Series 2x1 Panel Menu Board Adjustable
  • Height6.00
  • Width8.25
  • Weight29.60
  • Mount two screens with perfect alignment on a single bar
  • Tilt each display independently from -6° to +15° to remove glare
  • Install in landscape or portrait to suit any menu layout
  • Pole base tilts 90° to fit angled or flat ceilings
  • Supports 32 to 65 inch displays up to 66 lb each with VESA up to 600x400

Seamless Dual-Display Alignment

The single-bar mounting plate aligns two screens edge to edge with only the bezels visible. Each display tilts independently from minus six to plus fifteen degrees so glare can be removed from either panel. The mount accepts VESA patterns from 100x100 up to 600x400.

Suited for Commercial Menu Boards

Restaurants, cafés and retail spaces that need two 32 to 65 inch displays in a fixed landscape or portrait array will find the ceiling-mounted design practical. Installers who require a floor stand, a single-screen arm or a mount for screens heavier than 66 pounds each should look at other solutions.

Steady Under Continuous Public Use

The steel construction and 90-degree adjustable pole base lock the assembly rigidly to any ceiling angle, preventing drift during all-day operation. Independent tilt joints hold their set position without sag so the aligned pair stays level throughout extended trading hours.

Highlights

  • Mount two screens with perfect alignment on a single bar
  • Tilt each display independently from -6° to +15° to remove glare
  • Install in landscape or portrait to suit any menu layout
  • Pole base tilts 90° to fit angled or flat ceilings
  • Supports 32 to 65 inch displays up to 66 lb each with VESA up to 600x400

Specifications

BrandMonoprice
Model139662
Part Number139662
NameMonoprice Commercial Series 2x1 Panel Menu Board Adjustable Tilt Ceiling TV Mount for Displays Between 32in and 65in, Max Weight 66 lbs. ea., VESA Patterns up to 600x400
Height6.00
Width8.25
Weight29.60
Shipping weight13.43 kg
Package size1029 × 203 × 152 mm

Questions about this item

What display size and weight range must my screens fall within for this 2x1 ceiling mount to support them?

Each display must measure between 32 and 65 inches and weigh no more than 66 pounds.

Can the pole base adapt to my existing angled ceiling without extra hardware?

The pole base tilts a full 90 degrees, allowing it to mount on any ceiling or wall angle.

How do I verify the two displays are perfectly aligned after installation?

The single-bar mounting plate creates a seamless menu board; check that the bezels line up with no visible offset.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.