Monoprice Inc.
Monoprice Inc. 127309 power extension cord 2.00 ft black C14 to C13 16AWG
Two-foot black extension cord links a C14 inlet to a C13 outlet using 16 AWG conductors rated at 13 A
- TypeOthers
- ColorBlack
- Length2.00 ft.
- Connector Number2
- Extends reach by 2.00 ft for flexible placement
- 16AWG conductors support up to 13A current draw
- C14 to C13 connectors link monitor to PSU
- SVT jacket rated for IEC 60320 standard
- Frees a wall outlet by daisy-chaining devices
Power extension cord for IEC equipment
The Monoprice 127309 is a two-foot black power extension cord built with 16AWG conductors and rated for 13 amps. It connects a male IEC 60320 C14 plug to a female IEC 60320 C13 connector. This cable suits desktop PCs, monitors or rack devices that use standard IEC connectors. It is not for buyers who need a longer reach or a different connector type.
Replaces short or missing IEC jumpers
Use this cord when a factory power cable falls short of a PDU or when daisy-chaining a monitor from a PSU C13 outlet. The two-foot length adds just enough slack for tidy routing inside a case or rack. The jump is worth it only when the existing gap is roughly this distance; longer runs need a different cable.
Plug-and-play IEC connection
Installation requires pushing the C14 plug into a C13 socket and the C13 connector onto a C14 inlet until both seat fully. No tools or drivers are involved. The most common issue is a loose fit if the mating connector is worn, which can cause intermittent power. Verify both ends latch securely before relying on the link.
Highlights
- Extends reach by 2.00 ft for flexible placement
- 16AWG conductors support up to 13A current draw
- C14 to C13 connectors link monitor to PSU
- SVT jacket rated for IEC 60320 standard
- Frees a wall outlet by daisy-chaining devices
Specifications
| Brand | Monoprice |
|---|---|
| Model | 127309 |
| Type | Others |
| Color | Black |
| Length | 2.00 ft. |
| Connector Number | 2 |
Questions about this item
Will the male C14 plug on this 2.00 ft cord fit directly into a standard computer power supply C13 panel socket?
Yes, the male IEC 60320 C14 plug is designed to mate with the C13 panel connector found on most computer power supplies.
Does the 16AWG SVT cable require any tools or wiring to connect between a monitor and a PC power supply?
No tools are needed; simply push the female C13 end onto the monitor's C14 inlet and the male C14 end into the PSU's C13 outlet until both click securely.
The cord is rated 13A — what should I check before using it with a high-draw monitor or power adapter?
Verify that the monitor or adapter's nameplate current draw does not exceed 13 A; if it does, use a heavier-gauge cord instead.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



