Monoprice Inc.
Monoprice Inc. 121808 DisplayPort cable 100 ft 32.4Gbps 8K@30Hz 5K@60Hz 4K@120Hz fiber optic SlimRun
A 100-foot fiber-optic DisplayPort cable delivering 32.4 Gbps bandwidth for 8K at 30 Hz, 5K at 60 Hz or 4K at 120 Hz with 24-bit colour
- TypeDisplayPort
- Length30.48
- Cable Length99.97 ft.
- Connector Number2
- FeaturesDisplayPort 1.3 Compliant: This cable is compliant with the
- Supports 8K at 30 Hz with 24-bit RGB colour
- Delivers 5K at 60 Hz and 4K at 120 Hz for high-refresh gaming
- 4 Gbps bandwidth meets DisplayPort 1.3 specification
- Fiber-optic design transmits 8K signals up to 150 ft without external power
- Thinner polymer optical cable bends tighter and resists damage better than glass fibre
100 ft SlimRun DisplayPort cable
This 100 ft SlimRun DisplayPort cable carries 32.4 Gbps over optical fiber, supporting 8K at 30 Hz, 5K at 60 Hz and 4K at 120 Hz with 24-bit RGB colour. It meets the DisplayPort 1.3 specification and remains backwards compatible with earlier DisplayPort versions. The polymer optical construction is thinner and more flexible than traditional glass fibre, allowing tighter bends without signal loss. No external power or extenders are required for runs up to 150 ft.
Check source output and display input
Verify that your graphics card or media player has a standard DisplayPort output and that your monitor or projector accepts a DisplayPort input at the desired resolution and refresh rate. The cable is directional, so confirm which connector attaches to the source and which to the display before routing it through walls or conduit. Ensure the installation path can accommodate the cable's bend radius and that no intermediate adapters or splitters are introduced that could limit bandwidth.
Fibre-optic design removes distance limits
The optical-fibre core replaces copper conductors, so the 100 ft length delivers full 32.4 Gbps bandwidth without the signal degradation that limits passive copper cables at this distance. Because the link is self-powered from the DisplayPort ports, no separate power supply or active extender boxes are needed, simplifying long-run installations in home theatres, conference rooms or digital-signage deployments. The slim, flexible jacket eases cable management in tight raceways.
Highlights
- Supports 8K at 30 Hz with 24-bit RGB colour
- Delivers 5K at 60 Hz and 4K at 120 Hz for high-refresh gaming
- 4 Gbps bandwidth meets DisplayPort 1.3 specification
- Fiber-optic design transmits 8K signals up to 150 ft without external power
- Thinner polymer optical cable bends tighter and resists damage better than glass fibre
Specifications
| Brand | Monoprice |
|---|---|
| Model | 121808 |
| Type | DisplayPort |
| Length | 30.48 |
| Cable Length | 99.97 ft. |
| Connector Number | 2 |
| Features | DisplayPort 1.3 Compliant: This cable is compliant with the DisplayPort 1.3 specification, which provides for up to 32.4 Gbps bandwidth. It is backwards compatible with all previous DisplayPort versions. |
Questions about this item
What comes in the box and do I need to buy anything else to use this cable?
The box contains the single 100 ft fiber-optic DisplayPort cable with a connector at each end. No external power supply or extender is required.
How do I decide between the listed 8K@30Hz, 5K@60Hz and 4K@120Hz capabilities?
Choose the mode that matches your monitor's maximum resolution and refresh rate; the cable supports all three simultaneously up to its 32.4 Gbps bandwidth limit.
What does the 32.4 Gbps figure mean once the cable is installed in my system?
It is the maximum DisplayPort 1.3 bandwidth the link can carry, enabling 8K@30Hz, 5K@60Hz or 4K@120Hz at 24-bit RGB color over the full 100 ft length.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114981BTC
In stock
