We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Monoprice Inc.

Monoprice Inc. 103033 RG6 25ft 18AWG 75Ohm Quad Shield CL2 Coaxial RF Cable Black

SKU CH-W67T-VS1FN

25 ft RG6 quad-shield coaxial cable rated CL2 for in-wall use with F-type connectors

  • TypeOthers
  • ColorBlack
  • Length25 ft.
  • Connector Number2
  • Maximum signal integrity with 75 Ohm 2200 MHz rating
  • Fire-safe CL2 rating for in-wall installation
  • Quad shielding blocks interference for clean video
  • 25 ft length reaches distant displays easily
  • Lifetime warranty backs every cable purchase

RG6 25 ft Quad Shield Cable

This Monoprice 103033 coaxial cable carries RF signals over a 25 ft run. It uses 18 AWG centre conductors with quad shielding and a 75 ohm impedance rated to 2200 MHz. The CL2 jacket meets in-wall fire safety requirements for residential installations. Two male F-type connectors are factory fitted.

For satellite TV and broadband installs

Suits installers running a single drop from a dish, antenna or cable entry point to a receiver or modem. The quad shield construction rejects interference on long runs. Buyers needing plenum-rated jacket for air-handling spaces should look elsewhere. Anyone requiring a different length or connector type will need another cable.

75 ohm 2200 MHz bandwidth

The 75 ohm characteristic impedance matched to 2200 MHz bandwidth is the specification that decides compatibility with satellite TV, cable broadband and over-the-air distribution systems. Mismatched impedance or lower bandwidth limits signal integrity on these services.

Highlights

  • Maximum signal integrity with 75 Ohm 2200 MHz rating
  • Fire-safe CL2 rating for in-wall installation
  • Quad shielding blocks interference for clean video
  • 25 ft length reaches distant displays easily
  • Lifetime warranty backs every cable purchase

Specifications

BrandMonoprice
Model103033
TypeOthers
ColorBlack
Length25 ft.
Connector Number2

Questions about this item

How can I confirm the cable is passing a clean signal after I connect it?

Check that the 75 Ohm impedance and 2200 MHz rating match your source and display specifications, then verify a stable picture with no dropouts on all channels.

What comes with the 25 ft RG6 cable and what must I supply?

The cable includes two factory-fitted F-type connectors on a quad-shield 18 AWG black jacket; you only need compatible F-type ports on your devices.

Which version of the Monoprice 103033 should I choose for an in-wall run?

The CL2-rated 25 ft model 103033 is designed for in-wall installation; select this length if it reaches between your outlet and equipment.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.