We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black-and-yellow Y-splitter cables with an 8-pin GPU female input and dual 6+2-pin PCIe male outputs, 20 cm each

Monoprice GPU 8-Pin Female to Dual PCI-E 8-Pin (6+2) Male Y Splitter Power Cable 20 cm 2-Pack

SKU CH-6XNE-XT570

Two 20 cm 18 AWG cables split one GPU 8-pin into two PCI-E 8-pin (6+2) connectors for graphics cards

  • TypeCable Connectors
  • ColorBlack
  • Length3 ft.
  • Connector Number1
  • Connector DetailVGA to VGA
  • Terminal GenderFemale to Female
  • Splits one GPU 8-pin into two PCI-E 8-pin (6+2) connectors
  • 18 AWG copper cores deliver stable GPU power
  • 20 cm length fits tight case routing
  • Latching connectors prevent accidental disconnection
  • Two cables included for multi-GPU setups

Power-splitter cable for dual graphics cards

This Monoprice Y-splitter turns one spare GPU 8-pin power connector into two PCI-E 8-pin (6+2) plugs. Each pack contains two black-and-yellow cables built with 18 AWG copper cores and locking latches on every connector. The 20 cm length keeps cable routing tidy inside compact mining or gaming rigs. Compatible with 6-pin and 8-pin graphics cards from ASUS, ASRock, Radeon, Sapphire, EVGA and Gigabyte.

Capacity limited by single 8-pin source

Both outputs share the same 8-pin feed, so total current draw cannot exceed what that one connector and the PSU rail can safely deliver. The 18 AWG wires are rated for 9.5 amps, giving enough headroom for mid-range cards but not for dual high-wattage GPUs running at full load. Builders needing independent power for each card should run separate cables from the power supply instead.

GPU 8-pin female input, not CPU 8-pin

The input connector is keyed for a graphics-card 8-pin socket and will not fit a CPU 8-pin header on the power supply. Using the wrong header can damage components, so verify the PSU cable labelling before connecting. This distinction is the single specification that decides whether the splitter works in a given build.

Highlights

  • Splits one GPU 8-pin into two PCI-E 8-pin (6+2) connectors
  • 18 AWG copper cores deliver stable GPU power
  • 20 cm length fits tight case routing
  • Latching connectors prevent accidental disconnection
  • Two cables included for multi-GPU setups

Specifications

BrandMonoprice
Model738635728708
TypeCable Connectors
ColorBlack
Length3 ft.
Connector Number1
Connector DetailVGA to VGA
Terminal GenderFemale to Female
SpecificationsLow Voltage, ANSI, 9.5 amps, VGA, 8, 20, centimeters, Black+yellow, 738635728708
FeaturesLow Voltage

Questions about this item

Will this splitter work with the 8-pin GPU cable already coming from my power supply?

Yes, the 8-pin GPU female input connects directly to your existing PSU 8-pin plug, turning one line into two PCI-E 8-pin (6+2) male outputs.

How can I confirm each connection is secure after I plug the cables into my graphics card?

Every connector has a latch that clicks into place; you will feel and hear it lock, preventing accidental disconnection.

What exactly is included in the 2-pack and do I need any extra adapters for a 6-pin card?

The pack contains two 20 cm black-and-yellow Y-splitter cables; the 6+2 pin male ends fit both 6-pin and 8-pin graphics cards without extra adapters.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.