We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 13-inch GPU power cable with single 8-pin male to dual 8-pin (6+2) male connectors

Monoprice BX0019-1170X GPU Power Cable Dell T3600 T5600 T7600 8 Pin to Dual 8 Pin 13-inch

SKU CH-PNWH-C8A3F

Adds two 8-pin (6+2) PCIe power connectors to compatible Dell workstations via a single 8-pin motherboard plug

  • TypeCable Connectors
  • ColorBlack
  • Length3 ft.
  • Connector Number1
  • Terminal GenderMale to Male
  • Specifications60 volts_of_direct_current, 8, 34, centimeters, Black, BX001
  • Adds dual PCIe power to Dell workstations
  • 13-inch reach fits T3600, T5600, T7600 chassis
  • 18 AWG tin-coated copper handles 60 V DC load
  • 6+2 pin ends work with 6-pin or 8-pin graphics cards
  • Self-adhesive tape secures cable routing inside case

Dell workstation GPU power adapter

This cable connects a Dell Precision motherboard to two graphics-card power plugs. It is built for owners of T3600, T3610, T5600, T5610, T7600, T7610, 5810, T5810, T7810, T7910 or T7920 systems who need extra PCIe connectors. The single 8-pin male end fits the board while the dual 8-pin (6+2) male ends feed the card.

Upgrade from missing or insufficient GPU power

The adapter replaces the absent or inadequate factory cables that prevent a modern graphics card from running. It is worth fitting when the workstation has a compatible Dell motherboard and the power supply can deliver the required current through the original 8-pin header. Builders using non-Dell boards or generic power supplies must not use this cable.

Check motherboard model and power-header type

Verify the exact workstation model against the supported list before ordering. Confirm the motherboard presents the proprietary 8-pin PCIe header this cable expects. Ensure the graphics card uses standard 6-pin or 8-pin inputs that match the dual (6+2) connectors. The 13-inch length suits typical chassis routing but measure your layout to be sure.

Highlights

  • Adds dual PCIe power to Dell workstations
  • 13-inch reach fits T3600, T5600, T7600 chassis
  • 18 AWG tin-coated copper handles 60 V DC load
  • 6+2 pin ends work with 6-pin or 8-pin graphics cards
  • Self-adhesive tape secures cable routing inside case

Specifications

BrandMonoprice
ModelBX0019-1170X
TypeCable Connectors
ColorBlack
Length3 ft.
Connector Number1
Terminal GenderMale to Male
Specifications60 volts_of_direct_current, 8, 34, centimeters, Black, BX0019-1170X

Questions about this item

Will the 13-inch cable reach from the Dell motherboard 8-pin connector to a dual-slot graphics card in a T5600 chassis?

The cable is 13 inches (34 cm) long including both connectors; measure the routing path inside your T5600 to confirm it reaches your card without tension.

Which end plugs into the Dell T7600 motherboard and which ends go to the graphics card?

The single 8-pin male end connects to the Dell motherboard power header; the two 8-pin (6+2) male ends connect to the graphics card — they are not interchangeable.

The 18 AWG wires are rated for 60 V DC — how often should I inspect them for heat damage?

Check the cable and self-adhesive tape mount every few months; replace the cable if insulation shows discolouration, melting or the connectors feel loose.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.