We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black dual 1/4 inch TS male instrument cable with color-coded red and gray knurled connectors, 10 ft length

Monoprice Inc.

Monoprice 601461 Dual 1/4" TS Male Instrument Cable 10 ft 26 AWG

SKU CH-ZTE3-X431E

Connects two-channel keyboards or drum machines to a mixer with dual 1/4" TS plugs and copper braid shielding

  • TypeOthers
  • ColorBlack
  • Length10.00 ft.
  • Connector Number2
  • Dual TS connectors link stereo gear to a mixer
  • 10 ft length spans stage or studio setups
  • 26 AWG conductors carry clean instrument signals
  • Copper braid shield rejects noise and hum
  • Colour-coded grey and red plugs with knurled grips speed patching

Dual TS cable for stereo instruments

This ten-foot cable carries two independent mono signals on colour-coded grey and red 1/4-inch TS plugs. It is built for keyboards, drum machines and any device with a two-channel output. Knurled grips make insertion and removal easy on stage or in the studio. The 26 AWG conductors and copper braid shield keep the signal clean over the full length.

Two connectors at each end replace two separate

A single jacket holds both channels so you run one cable instead of a pair, reducing clutter and the chance of mismatched lengths. The colour coding prevents accidental left-right swaps at the mixer or interface. It also works as a stereo patch cord between outboard gear and a console. Lifetime warranty covers the assembly against defects.

Handles line-level signals up to ten feet

The 26 AWG conductors are sized for typical instrument and line-level sources within the rated length. Beyond ten feet or with very low-output passive pickups the thinner gauge may add resistance and high-frequency loss. Not suited for speaker-level currents or phantom-powered microphone circuits.

Highlights

  • Dual TS connectors link stereo gear to a mixer
  • 10 ft length spans stage or studio setups
  • 26 AWG conductors carry clean instrument signals
  • Copper braid shield rejects noise and hum
  • Colour-coded grey and red plugs with knurled grips speed patching

Specifications

BrandMonoprice
Model601461
TypeOthers
ColorBlack
Length10.00 ft.
Connector Number2

Questions about this item

Will the 26 AWG conductors or copper braid shielding need replacement after extended use?

The cable uses 26 AWG conductors with copper braid shielding; no user-serviceable parts are inside, so replacement is only needed if the jacket or connectors suffer physical damage.

What is the first performance limit reached when running this 10 ft dual TS cable continuously?

The practical limit is signal attenuation over the 10 ft length; the 26 AWG conductors and braid shield maintain integrity until the cable is bent beyond its strain relief or the connectors loosen.

Does the cable generate noticeable heat or noise when patched into a mixer all day?

Passive instrument cables produce no heat or electrical noise of their own; the copper braid shield rejects external interference during continuous operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.