Monoprice Inc.
Monoprice 25ft XLR Female to 1/4inch TRS Male 16AWG Cable 4772
A 25-foot XLR female to 1/4-inch TRS male cable built with 16 AWG conductors and gold-plated connectors for professional audio connections
- TypeOthers
- Length7.62
- Connector Number2
- FeaturesBuy with Confidence: With Monoprice's Lifetime Warranty on a
- 25 ft length reaches distant gear without extension
- 16 AWG conductors carry strong signal over long runs
- Gold-plated contacts resist corrosion for lasting clarity
- XLR female to 1/4 in TRS male fits pro audio devices
- Lifetime warranty backs every cable against defects
Professional audio interconnect
The Monoprice 4772 is a 25ft cable built for studio, stage and home entertainment setups. It carries balanced signals between XLR female and 1/4inch TRS male connectors using 16AWG conductors. The construction targets broadcast gear, instruments and high-end audio systems alike.
Thermals noise and power draw
As a passive analogue cable it generates no heat and draws no power during normal use. The gold-plated contacts maintain low resistance without active cooling. Operation is completely silent because no electronic components are present.
Bundled accessories and software
No software, adapters or additional accessories are included in the package. The lifetime warranty supplied by Monoprice is the only bundled benefit. Buyers needing right-angle plugs, cable ties or signal-processing software must source those separately.
Highlights
- 25 ft length reaches distant gear without extension
- 16 AWG conductors carry strong signal over long runs
- Gold-plated contacts resist corrosion for lasting clarity
- XLR female to 1/4 in TRS male fits pro audio devices
- Lifetime warranty backs every cable against defects
Specifications
| Brand | Monoprice |
|---|---|
| Model | 104772 |
| Type | Others |
| Length | 7.62 |
| Connector Number | 2 |
| Features | Buy with Confidence: With Monoprice's Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers. |
Questions about this item
How do I connect the XLR female end to my microphone and avoid the loose-fit mistake?
Push the XLR female connector onto the microphone's male XLR until the latch clicks; the 16 AWG cable's weight can pull it loose if the latch is not fully seated.
Will the gold-plated contacts need cleaning or replacement over time?
Gold plating resists oxidation, so the contacts should not need cleaning; the cable itself has no user-serviceable parts and is covered by a lifetime warranty.
At what length does signal loss become noticeable on this 25 ft run?
The 16 AWG conductors keep resistance low; for balanced audio the 25 ft length is well within the range where level drop is negligible.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



