Monoprice Inc.
Monoprice 144652 Cat6A Patch Cable 10 Feet Blue 24AWG 500MHz CMR UTP
Cat6A patch cable, 10 feet, 24 AWG pure copper, 500 MHz tested, CMR riser rated, ultra-short snagless boots for high-density racks
- TypeNetworking Patch Cables
- FeaturesComponent Level: Compliant with TIA 568.2-D & ISO 11801, 100
- Component-level tested to TIA 568.2-D and ISO 11801 for reliable 10 Gb Ethernet
- CMR-rated bare copper conductors allow safe in-wall and riser installation
- Ultra-short snagless boot reduces bend radius for tight, high-density rack spaces
- 50 µm gold-plated RJ45 contacts with strain relief maintain long-term signal integrity
- 24 AWG stranded pure copper verified to 500 MHz on Fluke DSX-8000
10-foot Cat6A patch cable for dense racks
This 10-foot Cat6A patch cable uses 24 AWG stranded pure bare copper conductors in a UTP design. It is built for high-density data environments such as data centres and server rooms where space is limited. The ultra-short snagless boot reduces congestion and allows a tighter bend radius in shallow cabinets. Component-level compliance with TIA 568.2-D and ISO 11801 is verified by 100 percent transmission testing.
500 MHz component-level limit for 10 GbE runs
The cable is rated to 500 MHz and has passed the DSX-8000 Fluke Patch Test at that frequency, confirming component-level performance for 10 Gb Ethernet over UTP. CMR riser rating permits installation in walls, risers and between floors of commercial buildings. Gold-plated contacts rated at 50 micro-inches and strain-relief boots protect long-term signal integrity. The IEEE 802 standard for 10 Gb Ethernet over UTP cable is supported.
Replaces bulkier Cat6A
Installers upgrading from standard-boot Cat6A or Cat6 patch cords gain the shorter bend radius needed for high-density patch panels and limited-depth racks. The micro SlimRun profile eases cable management where every millimetre counts. Buyers who need longer runs beyond 10 feet or a different jacket rating should select an alternative length or cable type.
Highlights
- Component-level tested to TIA 568.2-D and ISO 11801 for reliable 10 Gb Ethernet
- CMR-rated bare copper conductors allow safe in-wall and riser installation
- Ultra-short snagless boot reduces bend radius for tight, high-density rack spaces
- 50 µm gold-plated RJ45 contacts with strain relief maintain long-term signal integrity
- 24 AWG stranded pure copper verified to 500 MHz on Fluke DSX-8000
Specifications
| Brand | Monoprice |
|---|---|
| Model | 144652 |
| Type | Networking Patch Cables |
| Features | Component Level: Compliant with TIA 568.2-D & ISO 11801, 100% transmission tested to component level. |
Questions about this item
What length should I pick for a standard rack-to-switch run?
The cable is supplied in a 10-foot length, suited for typical rack-to-switch or patch-panel connections in a 24 AWG stranded construction.
How does the 500 MHz rating translate to actual throughput?
The 500 MHz bandwidth enables 10 Gb Ethernet performance over the full 10-foot run when the cable is terminated to component-level specifications.
Is the RJ45 connector compatible with standard keystone jacks and switch ports?
Yes, the snagless RJ45 plug uses a standard 8P8C form factor with 50 µ gold-plated contacts, fitting any Cat6A-compatible jack or port.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115078BTC
In stock
