We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black power extension cord with IEC C14 plug and C15 socket, 14 AWG, 15 A rating

Monoprice Inc.

Monoprice 142052 power extension cord 1 ft C14 to C15 14AWG 15A

SKU CH-GXR1-C9CTV

A 0.3048-metre C14-to-C15 extension cord rated 15 A at 125 V for powering rack-mounted equipment from a distant PDU

  • TypeOthers
  • Length0.3048
  • Connector Number2
  • FeaturesRecommended for powering computers, monitors, and other esse
  • Extends AC power reach for rack-mounted equipment with 0.3048 m C14-to-C15 cord
  • Handles 15 A and 1875 W at 125 V for demanding server loads
  • 14 AWG SJT construction supports 100-250 V operation across data-centre PDUs
  • Grounded IEC 60320 connectors ensure secure, standard-compliant power delivery
  • Compact 1-foot length reduces cable clutter in dense cabinet installations

Short power extension for rack gear

This Monoprice 142052 cord extends an AC connection by one foot between a C14 inlet and a C15 outlet. It is built with 14AWG conductors rated for 15 amps at 125 volts and carries a 100-250V rating. The SJT jacket suits indoor rack and cabinet use. Model 142052 ships new in black.

Suits installers linking Cisco

Network engineers who need a very short jumper inside a cabinet will find the length convenient. Builders needing a longer run to a wall outlet or a different connector pair should look at other cables. The fixed one-foot length cannot be adjusted on site.

C14 plug to C15 receptacle decides fit

The C15 receptacle mates only with a C14 inlet on the device side, so the cord works only where that specific connector combination exists. Voltage and current ratings of 15A, 125V and 1875W must also match the equipment nameplate. Verify both connector types before ordering.

Highlights

  • Extends AC power reach for rack-mounted equipment with 0.3048 m C14-to-C15 cord
  • Handles 15 A and 1875 W at 125 V for demanding server loads
  • 14 AWG SJT construction supports 100-250 V operation across data-centre PDUs
  • Grounded IEC 60320 connectors ensure secure, standard-compliant power delivery
  • Compact 1-foot length reduces cable clutter in dense cabinet installations

Specifications

BrandMonoprice
Model142052
TypeOthers
Length0.3048
Connector Number2
FeaturesRecommended for powering computers, monitors, and other essential peripherals.

Questions about this item

How do I plug the C14 and C15 ends into my rack PDU and Cisco switch, and which orientation mistake should I avoid?

Insert the C14 plug into the PDU outlet and the C15 receptacle onto the switch inlet; the C15 key notch faces upward, so do not force it upside down or the ground pin will not engage.

What wear should I check for on this 14 AWG SJT cord after months in a hot cabinet?

Inspect the jacket for cracking or discoloration near the connectors, verify the C15 latch still clicks securely, and replace the cord if the insulation feels brittle or the pins show pitting.

At what load does the 15 A rating become the limiting factor during continuous operation?

The cord is rated for 15 A at 125 V, so sustained draws above 1875 W will exceed its capacity and cause the conductors to overheat.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.